Results 1 to 9 of 9

Thread: Vac Hose sizes?

  1. #1
    rawr. verified Feedback Score 4 (100%) Atrosity's Avatar
    Join Date
    Sep 2010
    Owner Since
    August 2009

    Location
    San Diego, CA
    Posts
    1,149
    Thanks
    21
    Thanked 29 Times in 23 Posts

    Vac Hose sizes?

    I plan on putting all my emissions back on the car including all the vac hose on the firewall. I need to know what sizes the hose are and how much should I get. Thanks!
    vroom vroom i drive a 93 toyota mr2.

    https://car.social

  2. #2
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    Probably 4-6mm. I would just take a trip to pepboys and have them match the hoses up.

    Vacuum reduction, Powdercoated misc, cruise relocate, Evo9 BOV, Custom catch cans, Russell fuel filter, SS braided fuel lines, High flow fuel loop, Autogage fuel gauge, Catless DP, DNP Y-pipe, Fuel pump hotwire.

  3. #3
    rawr. verified Feedback Score 4 (100%) Atrosity's Avatar
    Join Date
    Sep 2010
    Owner Since
    August 2009

    Location
    San Diego, CA
    Posts
    1,149
    Thanks
    21
    Thanked 29 Times in 23 Posts
    Quote Originally Posted by x2xtreme360 View Post
    Probably 4-6mm. I would just take a trip to pepboys and have them match the hoses up.
    I plan on purchasing the colored hoses online and my car will be at my friends house for like 2 months tops.

  4. #4
    Real drivers don't use speed limits verified Feedback Score 2 (100%) Woz's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Buffalo, New York
    Posts
    173
    Thanks
    1
    Thanked 9 Times in 4 Posts
    Well you want hose that fits snug to where you don't need any clamps. I also used non collapsable hose. I would get sample sizes and order what you need.

  5. #5
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    Quote Originally Posted by Woz View Post
    Well you want hose that fits snug to where you don't need any clamps. I also used non collapsable hose. I would get sample sizes and order what you need.
    Yes. Thick walled, non collapsible hoses that fit nice and snug. No cheap crappy silicone hoses. You can find them colored too.

  6. #6
    Real drivers don't use speed limits verified Feedback Score 2 (100%) Woz's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Buffalo, New York
    Posts
    173
    Thanks
    1
    Thanked 9 Times in 4 Posts
    also sorry i can't help with sizes, i just had a bunch of different size hoses around when i was replacing mine.

  7. #7
    Member verified Feedback Score 0 DocWalt's Avatar
    Join Date
    Sep 2010
    Owner Since
    Oct '08 - Oct '10

    Location
    Royersford, PA
    Posts
    3,841
    Blog Entries
    1
    Thanks
    1,070
    Thanked 442 Times in 317 Posts
    http://www.hosetechniques.com/svh-ca...t-black-p-1951

    It comes in black, red, and blue. They even used a 3s in their banner ads on motoiq, which is what grabbed my attention, haha.
    R135
    ╚╬╬╝
    - 24

  8. #8
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    Quote Originally Posted by DocWalt View Post
    http://www.hosetechniques.com/svh-ca...t-black-p-1951

    It comes in black, red, and blue. They even used a 3s in their banner ads on motoiq, which is what grabbed my attention, haha.
    Go by the sizes in that link.... do NOT buy that rip off price of $135.

  9. #9
    rawr. verified Feedback Score 4 (100%) Atrosity's Avatar
    Join Date
    Sep 2010
    Owner Since
    August 2009

    Location
    San Diego, CA
    Posts
    1,149
    Thanks
    21
    Thanked 29 Times in 23 Posts
    Intake Manifold (small fittings) - 03.5mm
    Boost Controllers (Greddy, HKS & other) - 03.5mm, 04.mm or 06.0mm
    Windshield Washer Bottle - 04.0mm
    Intake Manifold (small fittings) - 06.0mm
    Radiator Overflow Hose - 06.0mm or 08.0mm
    Hood Hold Up Rod - 06.0mm or 08.0mm
    Intake Pipe (large fittings) - 08.0mm (includes aftermarket intakes & some radiator overflow)
    Misc. covers of hard lines, etc. - 10.0mm (refer to Slit ‘n Groom(TM) Technique in instructions)


    Yeah this is what I was looking for, yeah I don't want to spend 135 dollars for something I can piece together with the correct heat resistance.

    /thread
    Last edited by Atrosity; 11-09-2010 at 08:06 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering