Need some help . Google the crap out of this . Getting no injector pulse or coil fire in my aem ems series 1 in a 3000gt vr4. Getting voltage everywhere I'm supposed to . Verified wiring from injectors and ptu to Em's. Everything is good .
Getting the stat sync when cranking and registering engine rpm . Also seeing tooth counts etc change when cranking like it's receiving a signal .
Tried using the last known good calibration the previous owner had in the car . Also tried the aem calibration for a fresh start up.
Posted a pic of the cam/crank setup page so you can see what's set up . From all my deciphering of the inrerwebs it's setup correctly . Any ideas ?
29873303_10100287202976822_7494210810328413587_o.jpg
Bookmarks