Tactrix logging Q

[FluffyCow]

I know the Openport2.0 can log via Sdcard. What I don't know and can't seen to find is how to write the config file for the card to make it log. All the resources I look up reference a site that doesn't exist any more. Does anyone have a log file for it set up that they wouldn't mind sharing with me? need to log to be able to start tuning for 550cc injectors with my 15gs, and the laptop I'm going to use to tune won't hold a charge. I have some old sdcards kicking around I can use, but don't want to drop 25 bucks on a battery that may or may not charge(possibility the main board of the laptop is keeping the old battery from charging). I could get a whole laptop for 50-75 bucks to tune with...but I digress. I want to log with the built in tactrix software and don't know how to config the file. Any help is greatly appreciated.

Sent from my SM-G955U using Tapatalk

[striker2]

There is at least 2 or 3 different threads on here that some of us have shared our logcfg file(s) in.

Edit. First one I found when searching through my posts. This link will take you straight to my first post in this thread but there is a lot of good info and links in this thread.
http://www.3sgto.org/threads/8652-St...l=1#post331633

[FluffyCow]

Something tells me I did all my searching on 3si, instead of here. I would have found that otherwise. Thanks for not roasting me for being an idiot lmao [emoji23][emoji23]

Sent from my SM-G955U using Tapatalk