New invention, convert OBD1/MUT into Canbus OBD2 for Torque App, and read Flex Fuel

**BlackStealth** · 04-16-2017, 11:46 AM

Some of us have double din android radios in our cars, and it would be cool to have some nice gauges displayed in there (via Torque app). I created a device that reads OBD1, MUT, and MUT over OBD2 and converts it into high speed Can Bus (500k). Tired of the slow OBD2 ISO9141-2 that some of our cars support? The ones I'm talking about are 98-99 ECUs. My device communicates in MUT mode for fast data acquisition, and then converts it into fast OBD2 (can bus mode). Also, I added support for reading Ethanol Flex Fuel %, Boost pressure sensor, Oil, Fuel, and Knock. I created some new PIDs so torque can display these new features. Interfaces with LCDBC, Chrome, and all ECU models of the 3000GT / Stealth.

Manual: http://lcdbc.xp3.biz/CanbusDeviceManual.pdf

On my bench I created a simulate screen shot that could be displayed on Torque.

**2fnloud** · 04-16-2017, 04:36 PM

It took more work than what was mentioned in your PDF to get the .CSV file in the proper location. But it is done.

**BlackStealth** · 04-16-2017, 06:23 PM

Originally Posted by 2fnloud

It took more work than what was mentioned in your PDF to get the .CSV file in the proper location. But it is done.

I copy the instructions from torque's website.

You could always enter the custom PIDs manually.

**2fnloud** · 04-16-2017, 09:55 PM

Originally Posted by BlackStealth

I copy the instructions from torque's website.

You could always enter the custom PIDs manually.

I got your CSV file put in the proper place, but the folder location was not on my SD card. Yes I moved the program to my SD card, or at least my phone says that it is. Oh wells, thanks for sharing the CSV file.