Video of what it does:
https://www.youtube.com/watch?v=xwRm...ature=youtu.be
What it can do:
- Record datalog info directly to SD Card (in .csv format)
- Automatically start Recording if your car experiences a knocking event (user definable)
- View data in real time
- View Active and Stored faults
- Clear faults
- Perform various diagnostic tests, ie, turn on various solenoids, turn on fuel pump, disable injectors.
- Works with all year model 3S vehicles (91-99), including Chrome ECU and LCDBC device.
- supports new datalog items (via LCDBC), Boost, WBO2, Boost solenoid duty cycle, External sensors 1-4 ( AEM EGT, oil pressure, fuel pressure, oil temp).
- can be operated without an SD Card.
- for best performance, I recommend using a brand name SD Card such as SanDisk, Lexar. No card included.
- tested cards so far (1GB/2GB/4GB Sandisk, 32GB Lexar)
- supports both FAT16 and FAT32 formatted cards.
My OBD1 cable has an extra red power wire with a crimped connector so you can plug that into the fuse panel, makes powering up the TFT Logger easy.
Also my OBD2/MUT cable powers up the TFT Logger using the OBD2 connector for power.
SOLD OUT.
TFT Logger + OBD2/MUT cable + electronics
OBD2/MUT cable + electronics
TFT Logger + OBD1 cable
Null-modem adapter with two power leads.
![]()
Bookmarks