Dyno graph section

[mh3kgt]

Hey, just think it would be cool to see a section dedicated to posting dyno graphs and listing the mods at time of given dyno. Would be nice to be able to have one spot to go to for reference on what you should expect to make power-wise with a certain list of mods. I think it would cut down on the countless threads like "how much HP will these turbos make" I know not everyone will make the same numbers with the same mods, but would be nice to see regardless.

[3000GT MR]

Well you know what i have. But.. this is at wastegate pressure.
Full forged bottom end 8.5:1 CR
3sx evo3's
walbro
560cc
boost a spark
3"back straight back
jdm tranny
HKS evc-s boost controller
dejon pre turbos
EMU stage 3
cx fmic
+1 -3 cam gears
to name the major mods

[mh3kgt]

Thanks Chris! I still need to get my tune figured out a little more. That one you sent me has been working good, but I am getting some knock in areas...last run I think I hit like 15 counts or something I just need to take a weekend with the laptop and get my afr's dialed in better after I install my fuel pump hotwire.

[Austin@STM]

Stock bottom end/ heads/ cams
Stock 9b turbos/manifolds - no port work
AEM EMS
Evo 550's and Walbro 255
Custom Garrett core FMIC/piping
Hallman Pro MBC
E-85
On dyno made 23 psi falling to about 12
on the track 19 psi falling to about 14

[mh3kgt]

Sweet thanks, maybe we should just turn this thread into the official Dyno thread and make it a sticky.