WTB: Front AWD Crossmembers (Only the RH One is AWD-Specific)

**Street_Chally73** · 03-01-2015, 02:40 AM

I am in need of some good, used front crossmembers for my '91 R/T TT as mine all have had previous damages to them from past owners.

Seeing as how I've already gone this far with replacing all damaged parts, I would like to get these swapped out as well so I'm not wasting time trying to get my current ones fixed up & powdered. If you happen to have any of these available, please respond either here or send me a PM. Ideally, I'd like to get them all in one shipment, but realize not everyone is going to have the complete set of three.

The only AWD-specific crossmember is the right-hand side one, since it has the clutch vacuum tank attached to it and has a couple of captured nuts to fasten that on to it.

Front Crossmembers Needed.jpg

Thanks guys!!

**gs1000kat** · 03-02-2015, 10:34 AM

I have a few of each of 12 and 13 that should be in good condition. Should have 1 or 2 of 6 as well, but need to check condition of the lifting area. I've seen a few with that area crushed in.

**Street_Chally73** · 03-02-2015, 10:11 PM

Awesome! Please keep me posted with what you're able to find out about the last one's condition.

**gs1000kat** · 03-04-2015, 10:25 PM

Still need these?

**Street_Chally73** · 03-05-2015, 02:20 AM

Yes, I'll send you a PM.

Edit: PM sent

**Street_Chally73** · 03-06-2015, 11:02 PM

Hey GS1000Kat, you have a PM.

Signed,
The guy who still needs those

**Jimvr4** · 03-07-2015, 09:49 AM

The front cross member is MT specific, don't think the side one is.

**colossus** · 03-09-2015, 05:03 PM

I have one from my 91TT if needed- I have 6 and 12

**Elderloc** · 04-07-2015, 06:33 PM

I have a full set completely stripped and powder coated with Zinc Primer and Black Satin powder coat. Let me know if you need them they are off a Manual.