Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Old rusty engine with stuck pistons. Suggestions please!

  1. #1
    Why? Because Race Car. verified Feedback Score 0 akotten's Avatar
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Wichita, KS
    Posts
    445
    Thanks
    11
    Thanked 16 Times in 9 Posts

    Old rusty engine with stuck pistons. Suggestions please!

    Ok so I have the original motor from my stealth but it had been sitting outside for about 5 years. So I recently decided to tear into it so I could break it down for easier storage. Well ive got the block completely apart except the pistons and rods are stuck in the block. Does anyone have any suggestions as how to make it easier to remove them? I should really take pictures for you guys...this thing is pretty rusty.


    -Alex
    91 R/T TT
    Mods: RC 550s, Stillen Downpipe, Stillen Cross-Drilled Rotors, HKS Exhaust, HKS VPC, HKS EBC, HKS Turbo Timber, HKS Twin Power, HKS SSQV BOV, HKS SMIC, HKS Fuel Pump, Wiseco Pistons, 3SX Rods, Ferrera SS Valves, 3rd Gen Lifters, 15G Turbos, Centerforce Dual Friction Clutch, B&M FMOC, Unorthodox Racing Underdrive Pulley, EGR blockoff.

  2. #2
    1st ever COTM and COTY verified Feedback Score 9 (100%) green-lantern's Avatar
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,250
    Thanks
    654
    Thanked 459 Times in 354 Posts

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

  3. #3
    Why? Because Race Car. verified Feedback Score 0 akotten's Avatar
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Wichita, KS
    Posts
    445
    Thanks
    11
    Thanked 16 Times in 9 Posts
    Yeah I was just reading about that. But I need to get my pistons out first! haha

  4. #4
    Forum User Not Verified Feedback Score 4 (100%) TUFFTR's Avatar
    Join Date
    Sep 2010
    Owner Since

    Posts
    760
    Thanks
    27
    Thanked 13 Times in 9 Posts
    all i can suggest is soak the bores in WD40 or a spray lube like that, hopefully penetrates (giggity) and lets you slide em out...

  5. #5
    | @/|/| +|2()|/| verified Feedback Score 6 (100%) terrets's Avatar
    Join Date
    Sep 2010
    Owner Since
    December 2009

    Location
    Fox Cities, WI
    Posts
    1,144
    Thanks
    93
    Thanked 18 Times in 17 Posts
    LOTS of PB Blaster!

    If the cylinders are bad...you could probably use some sort of round grinder the get the rust out and make it easier.

  6. #6
    owner since 2004 Feedback Score 0 colt45 gto's Avatar
    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    cheshire, england
    Posts
    330
    Thanks
    20
    Thanked 28 Times in 15 Posts
    fill the bores with diesel, leave for a day. the slowly try to break them free by turning the crank slightly each way.
    3si is dead long live 3sgto.org

  7. #7
    Never finishes any verified
    Feedback Score 8 (100%) DrGonzo's Avatar
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Wake Forest, NC
    Posts
    2,569
    Thanks
    54
    Thanked 197 Times in 140 Posts
    ^agreed with the diesel idea. Let them soak and them smack each piston with a rubber mallet. That will help loosen things.

    Check it out on Youtube!!


    93 Stealth TT - The Stealth Project

    Renegade Tech Works ECS Controller on Intrax Springs
    Chrome ECU
    Hybrid 13g's
    EVO 560cc Injectors
    Spec Stage 3 clutch
    Ninja Performance Output shaft & Input spool
    Ninja Performance Solid Tensioner & Gates racing T-Belt
    CX Racing Dual Core FMIC
    Megan SS Exhaust
    Fidanza Cam Gears and Clear Covers
    3rd Gen Lifters
    HKS BOV
    K&N FIPK
    Maximal High flow converter
    Walbro FP & FuelLab FPR
    Maximal and Seattle Solid Mounts
    All -6an Lines
    Custom -6AN coolant neck lines
    AWS/ABS/Cruise Delete
    MP Rear Control Arms
    SS Brake Lines
    99 Front Conversion
    2nd gen Rear Bumper
    99 Combat Wing
    Complete interior LED Swap
    Skillard Fuel channel
    Oohnoo FPR Bracket
    .
    .
    More to Come......

  8. #8
    Why? Because Race Car. verified Feedback Score 0 akotten's Avatar
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Wichita, KS
    Posts
    445
    Thanks
    11
    Thanked 16 Times in 9 Posts
    hmmm...I'll have to give the diesel idea a try.

  9. #9
    Forum User verified Feedback Score 1 (100%) BadHabit's Avatar
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    N.C.
    Posts
    81
    Thanks
    5
    Thanked 5 Times in 5 Posts
    LOTS of PB Blaster!
    This works!

  10. #10
    Here for the party Not Verified Feedback Score 1 (100%) CoreyB's Avatar
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Canaan NH
    Posts
    1,749
    Thanks
    368
    Thanked 108 Times in 89 Posts
    Acetone mixed with ATF.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering