if you are logging on a notebook pay the small fee and get HHH
if you are logging on a notebook pay the small fee and get HHH
Parting 6 speed
Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace
I suppose I could log on my laptop, but the battery life sucks lol I normally just use my Palm and MMCd. Wait, doesn't TunerproRT have a logging feature as well? I could just log straight off my Maftpro I guess
TunerPro RT does have a logging feature. I used it instead of HHH for use with Virtual Dyno because I can read both boost and wideband (I have the wideband hooked in through the ecu's egrt so HHH can read it but not the boost). But the maft-pro doesn't log on it's own, in order to log you need a laptop connected to you maft-pro. Also, you need tunerpro rt V5 (which is in beta right now) because V4 doesn't log the time at which each sample is taken.
thanks for the info I'll have to see what I can do with TunerproRT
I have done some full pulls and they are now also reading around 1150 HP. Is the sampling rate through my setup just too low? It is half way sane until the RPM data is quite smooth in the upper revs.
FYI it doesn't look worth it trying to log through the e-manage blue, the claimed sample rate I have seen is only 10 per second!
So, I happened to be looking through a log and noticed that the sampling changes from 20ms to 200ms. I'd imagine if the program was written incorrectly, it would cause the 1000hp issue. Going to look into why it changes in the log some more.
'92 Dodge Stealth RT/TT - Aug. 2012 COTM
BTW for shits and giggles I plotted an aem log that I took on the dyno last week (or was it the week before... time flies). Anyway, they were damn close!
1993 3ooogt vr4
Big single turbo and every other mod...
Powered by BorgWarner
I have shown 310-330 whp and 340-360 tq.
Seems a bit high but not unbelievable.
A dyno program I got for my Droid also said 330 whp, at least they are consistent!
93 R/T - Modded, Full Suspension, Full Exhaust, Quaife Diff, Turbo brakes, Alpine/Boston Sound One of 25
98 VR-4 - Billet 13t's, Downpipe, Blitz EBC, Ohlins R/T coil overs, SCE center differential, SCE oil pan, Pampena braced trans, TEC Rear Strut Bar, Custom Front Strut Bar, Camber Arms, Alum Driveshaft, 2" Koyo, Maximal oil cooler, SAFC2, Defi Gauges, RC 550's, Supra Pump, Skillard Splitter, Hardpipes, XYZ 14" front brakes/Carbotech, 255 Dunlop Z2's, AMR 18x9's, Alpine/Infinity/JL Sound. One of 13
3SNG15 Best overall
"I explode 1 piece rotors" -- ABM --
Runs 12's (12.98's!!!!!!)
My Garage
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks