Going single!

[1995vr4]

1424572855143.jpg
Opinion on this oil after the first change? Put in rotella t1 sae 30 with a bit of Stp zinc additive and used lucas assembly lube. Used break in strategy on a writeup chris from ninja posted. This is after 150ish miles. Ran like a dream. I see no bearing material but it's got an odd color to it. I'm assuming that's from the combo of additives?

[anyonebutme]

fresh engines produce a lot of crap, which is why I change the startup oil after the first warmup. I think the color is from assembly lube and if it's shiny its from rings seating.