Okay, new 02's installed a few minutes ago, with the jumpers set to GTO. It started easily and idles pretty good at 14.7-15.2. I didn't yet get a chance to log with evoscan. Took it for a drive around the block and it runs pretty good if I'm light on the throttle. It seems to lean out too much at tip-in, and when foot off the gas decelerating it stalls out. When accelerating to around 0 psi or above, it seems to be misfiring pretty bad. I think I have another issue there. I still need to double check my idle switch/tps, cylinder pressure test, and boost pressure test, so hopefully it's a simple fix.
Can someone confirm that nothing else should be affected by having the 02 jumpers set to GTO?