
Originally Posted by
Jimvr4
As said before the fuel trims aren't used at WOT. That is the open loop region. If you want to lean it at WOT then you lower the VE at 1600 Hz like you're doing. You probably shouldn't go much above 11 AFR though if you're on gas.
As far as closed loop goes, just run the car in your driveway and log the O2 sensors and the low trims. The low trims should adjust once every 4 minutes. Check that your O2 sensors are cycling.
If the low trims peg at +12.5 then you need to lower VE below 100 Hz. If they peg at -12.5 then you need to raise VE below 100 Hz. Don't bother looking at the trims at WOT.
Bookmarks