Possible spun bearing

[Assy]

Exactly, Yes that's usually what I want too.

If the crank is out, stand it on it's end and tap it with a screwdriver or similar.

It should ring like a bell. If it doesn't then it's cracked. Spun barings sometimes end up with a cracked crank. The machine shop should check that first but it's best to check first yourself.
Some noobs posted on another forum that the "ringing" test was the difference between a forged and cast cranks......but they were noobs. All good cranks ring.

i will try that, And i didnt spin my bearing my bearings just went bad

EDIT: rings like a bell

[CoreyB]

Wo you are just full of infinite wisdom Steve. Assy, I gotta bow out of this thread. I wouldnt want a noob giving you bad advice.

[Mike-92RT]

lol what an interesting conversation this has become