Simulated Narrowband - im over it

[GTOJOE]

Sending him a link to this page.

Sent from my GT-I9300 using Tapatalk

[mjannusch]

PLX wideband with narrowband simulation works fine on my Spyder with it set up for only one O2 sensor in Chrome.

[Dougal]

Hey Greg,

I'm the person GTOJOE was referring to earlier. Running the AEM UEGO with Jesters Chromed 91-93 ecu.
I've got a JDM 91 TT motor installed in my AUDM magna (similar to the Diamante). All going well just needs to be tuned.

I'd like to use the wideband even if only for tuning at present but am happy to switch back to NB o2 sensor for road driving. Still if I can use a narrowband simulator even better.

Since i got the ecu from 3sx ive not received a download link from them for the ROM. Ive hunted all over and cant find it anywhere. Been all over limitless pages, tactrix pages, openecu pages and wiki, chromedecu.org and clonedecu site.

Where can i get a link to download please?

[Greg E]

Shoot Adam a message and he will hook you up with a coupon code to DL it off the chrome ECU website or make a donation thru the cloned ECU website and you'll get a link too.

[dpartinvr4]

hey just updating this to put in my input, I'm simulating both narrowbands off of the PLX smAFR's narrowband output, initially I noticed my ltft low's were way off, where my mids and high would be about 0 and the lows were -12.5. so after doing some more research it turns out I had higher latency values for my EVO 560's than I should have had. after rescaling the injectors to 600cc and putting in the proper latency, a few tweaks to the VE smoothing, all my Fuel trims are within .5% of zero now.