Gauging interest in custom sidemount intercoolers w/9.75" x 11.75" x 4.5" Bell Cores

[J. Fast]

Bolt on... and will accept stock intercooler piping. Somewhere in the $1000 range with upgrade options for a shroud and a custom oil cooler bracket. Intercooler entrance and exit piping will be 2".

Need atleast 5 sets or it's not worth it.

[wingnut]

Would love an upgrade...but a grand is on the steep side for me

[2fnloud]

I am interested.

[J. Fast]

Tidbits from my 3sgto.org Facebook post.

They will be the largest SMIC's ever fabricated, will accept OEM piping configurations, and good for 400hp per turbo.

In addition I can also offer a custom shroud and/or upgrade to an integrated oil cooler bracket for twin oil coolers or a single cooler in stock location. The oil coolers can be mounted behind the cores.

Intercooler cores will be 4.5" deep Bell Cores. 2" inlet/outlet.

This is the dream setup for you DR750 guys or big twin turbo setups.

I will be asking for a material deposit. Turn around will be 3 weeks.

Please start a list...

This is a good as it gets for not restricting airflow to the engine and radiator. Guys making over 500hp know what I'm talking about when you still have air conditioning and sit idle or run ragged on a road course.

[fullracegt]

How do these compare to the genes smic's ?

[FloridaVR4]

Pics of intercoolers you want to use?

[J. Fast]

Bell core # A450118100 core measurements are 4.5" x 11.8" x 10" .

Core chart and pricing is here... Bell Intercoolers | Air to Air Intercooler Cores

Cores for each set are $700, end tanks are $80, piping is $100. I'm basically building these as a favor to a few people that were involved in a bidding war over my last (2) sets of Gene's SMIC's. I told them I would replicate them for the same price. Gene lost his ass on his group buy... I'm a bit wiser and don't steal . I'll do it for cost plus $120 per set.

Price does not include shroud, dual oil cooler or single oil cooler mounts.

[mb7050]

Bell core # A450118100 core measurements are 4.5" x 11.8" x 10" .

Core chart and pricing is here... Bell Intercoolers | Air to Air Intercooler Cores

Cores for each set are $700, end tanks are $80, piping is $100. I'm basically building these as a favor to a few people that were involved in a bidding war over my last (2) sets of Gene's SMIC's. I told them I would replicate them for the same price. Gene lost his ass on his group buy... I'm a bit wiser and don't steal . I'll do it for cost plus $120 per set.

Price does not include shroud, dual oil cooler or single oil cooler mounts.

Cores for each set are $390, end tanks are $80, piping is $100..

[mb7050]

i just based my pricing on what you said before if you had sticked to that pricing these would have cost about 650$..

[HilbillyHomeboy]

This is really the way to go. If I had a Stealth, I would hop on this.

Jeremy