99 euro ecu support

[Greg E]

Shoot me a donation.

PayPal: nonstopmix@gmail.com

[The-Stig]

Just read this I'll send it you shortly bud.

Cheers.

#edit:donation sent and pm sent )

[The-Stig]

So update today, installed my 99 ECU in my 96 GTO MR. Everything OK, decided to flash chrome and bricked myself..............








....but the car LIVES! Doing some testing to see everything checks out but she is running and driving the same. Some logging to come shortly.

So im running a Jap 96 GTO MR Z15A with a swedish Euro ECU with a USA spec flash file in the UK lol

600901_10151886364493580_293897742_n.jpg1461401_10151886364008580_770561706_n.jpg

[Ange]

good stuff!

what other mods do you have/are you planning?

[The-Stig]

Hi guys, done a few gentile log runs in the car touching boost and there is no knock or adverse reactions from the car itself.

Did have CEL lights in the dash but updated the periphery2 bit 15 as off and reflashed, had to clear the CEL codes using EvoScan 2.4 and all is well.

Waiting on an Inovite LC-1 so i can wire it into Blackstealths LCD controller to create a clean monitor install. Will also be acquiring a Mac valve 35AAAADDBA1BA to replace into the stock boost controller solenoid and control boost from the ECU.

So far it looks like the Euro ECU are 100% compatible with Chrome, ill be doing further testing however.

***EDIT:

i am currently on stock engine with 13T and greddy FMIC, waiting to fit 550's.

[Ange]

Hi guys, done a few gentile log runs in the car touching boost and there is no knock or adverse reactions from the car itself.

Did have CEL lights in the dash but updated the periphery2 bit 15 as off and reflashed, had to clear the CEL codes using EvoScan 2.4 and all is well.

Waiting on an Inovite LC-1 so i can wire it into Blackstealths LCD controller to create a clean monitor install. Will also be acquiring a Mac valve 35AAAADDBA1BA to replace into the stock boost controller solenoid and control boost from the ECU.

So far it looks like the Euro ECU are 100% compatible with Chrome, ill be doing further testing however.

***EDIT:

i am currently on stock engine with 13T and greddy FMIC, waiting to fit 550's.

you'll probably overrun stock maf with those mods so you'd want evo 8/9 maf too.

Euro Ecu compatible with chrome?? Don't think so. Greg said it wasn't.

[Greg E]

It's compatible with cars without an immobilizer.

Jesters is working on a Euro ECU that will disable the immobilizer too!

[Ange]

Really then I should get chrome too.

But I don't plan on retuning it untill I go bigger turbos so I'll wait untill then. Runs fine as is now anyways.

[The-Stig]

It's compatible with cars without an immobilizer.

Jesters is working on a Euro ECU that will disable the immobilizer too!

Well looking at my setup i recon as mentioned before the JDM GTO doesn't have a separate immobiliser check circuit external to the ECU (to my limited knowledge) but the
UK 3000GT does (correct me if im wrong here)

Given the opportunity I want to test this by plugging in my ECU to a 3000GT to see if it runs at all, need a volunteer now lol.

Im not planning on running huge power, something around 450 will suffice. If any of the developers need any code testing on the car let me know im willing to help out.

[99 vr4]

Read the image on your ECU and save it before writing Chrome onto it.

Do you know how to so this? If not, I can give you a copy of the stock euro rom to flash back on with the immobilizer disabled. You won't be able to do much with it though nor does it have the chrome mods.

Just a quick note on this. .. You MUST save YOUR ROM... No one else's ROM will work if you have an immobilizer. . There is a code in the ROM which ties it to a specific immobilizer box. This is the same setup used in the 2000 Eclipse. ..

Sent from my SPH-L720 using Tapatalk