So I've talked to many people about this and everyone who I have talked to says "No, there is not a difference between the cogs other than the 93 having the fins for the sensor. Well, this is for you guys, fucking asshats.
There is a difference, a 1 tooth difference. The one with the fins is obviously the 93 cog. This also means that unless you cannot run mixed cam's like I was told unless you offset the mixed one. I ran a 92 intake cam and a 93 exhaust cam because my 93 intake cam had broken. Upon doing a compression test, my numbers where really high and I did not know why, well, here is a side by side comparison. Now the question is that now that I have 92 cams, do I offset it to match the 92 alignment, or do I align it to the 93 spec? I am assuming that I need to run it according to the 92 spec but I rather be sure.
my crank cogs where injured in this test...
Bookmarks