Billet TC, stock TC, 300M output shaft, stock welded headers

[UTRacerX9]

Sold my car awhile ago and now getting around to selling some parts I had accumulated over the years.

This is one of the NoCar billet TC's that were made years ago, no idea if he still makes them. I bought it from a member of the Pansy Patrol, (Clint I think) years ago. It has never been on a car. Also, the mid and tail end are also from a brand new never used TC. Cheapest I've found for the main billet housing is $600, and a stock TC is $400, then you'd have to get it assembled. 3SX is asking $2k for their assembled billet Main, mid, and end piece.

Asking $SOLD , this is set up for 18 spline, but can be converted to 25 spline with a different spool. It also includes the lower tension bracket. This should be the last TC you'll ever need.







Also have the mid and rear section of a 5 spd TC, this was on my car just for track passes. After a couple times out, I cracked the main housing and it started leaking which is why I bought the one above. I put my stock TC back on and didn't end up taking the car to the track again. I have the main section with the gears, but it will need to be rebuilt as one of the bearings is gone. Figured someone might want it for parts if they were going to buy a billet main housing and assemble their own. $50+ shipping.



Also selling my 18 spline 300M output shaft. SOLD.



I have a set of stock TT headers as well. The front header has been welded around the piping to the flange, so they can be ported. I started porting the rear one but never finished. $25 + shipping.

Also have a TT upper plenum and lower plenum, make me an offer, no idea what they are going for.

Thanks.