Page 17 of 20 FirstFirst ... 71516171819 ... LastLast
Results 161 to 170 of 195

Thread: Now Another Problem.....

  1. #161
    Based on that fact, couldn't I just ground pin 3 on both relays and that'd do it? Because power is being fed correctly to the fan from pin 2, and heading out via pin 5 to the pins 5 on the relays. It just seems like the relays are having issues with a ground between pins 1 and 3.

  2. #162
    Here for the party Not Verified
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Canaan NH
    Posts
    1,710
    Thanks
    364
    Thanked 106 Times in 87 Posts
    Provided pin 4 0f the relays has ground and pin has 12 volts then grounding pin 3 will activate the relays and turn on. But will not shut off.

  3. #163
    And it didn't even turn them on. Which pin should have 12 volts?? At this point, I'm thinking about a hotwire.

  4. #164
    Here for the party Not Verified
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Canaan NH
    Posts
    1,710
    Thanks
    364
    Thanked 106 Times in 87 Posts
    Sorry pin 3 should have 12v. Just ground pin 5, if they dont come on then, then the fan eiother doesnt have power, Pin 5 doesnt really connect to the ground of the fan or the fan doesnt work.

  5. #165
    OK. I'll see what that does.

  6. #166
    Grounding pin 5 did nothing. Should I ground pin 5 on the HI relay as well??

  7. #167
    Here for the party Not Verified
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Canaan NH
    Posts
    1,710
    Thanks
    364
    Thanked 106 Times in 87 Posts
    They are conected so it shouldnt matter, you can try it though. If it doesnt work the do a continuity test from pin 5 to the fans ground terminal, and verifiy that the fan does have 12v on its other terminal.

  8. #168
    It doesn't. At this point, I'm fed up, and I'm just going to hotwire it for a few days, til I can figure out the issue. I'm thinking splice together the two power lines for the fan motor, and the grounds?? That should do it, right?? There is definitely power going to the fans.
    Last edited by GRSHOPR; 10-07-2010 at 12:51 PM.

  9. #169
    Here for the party Not Verified
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Canaan NH
    Posts
    1,710
    Thanks
    364
    Thanked 106 Times in 87 Posts
    Just ground the fans ground terminal. Make sure that the fans power is switched though so the turn off with the key.

  10. #170
    Yeah, didn't work. I'm gonna splice the black wires and ground them and splice the blue wires together to the power source.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering