Fan pattern windshield washer nozzles.

[Toni]

Was that with a new rear pump or just using your old one?

My guess would be to try & fit a dual pump into the grommet in the rear (run one to your rear windscreen & the other should have enough power to control your two front nozzles). I know my Celica uses a single pump for both the front & rear nozzles, so you'd think the same would hold true to a 3/S if you were to retrofit one into the reservoir.


Sent from the garage

Just an old one. Hmm actually I have a couple lying around I guess I could try another one. I never use the rear wiper so I don't see myself squirtin the rear lol.

Yes! great mod! Costs about $20 here and you'll need a small file to enlarge a hole a bit (at least on a magna/diamante you will) and yeah, love mine!

You do not need to file anything on a 3s.

What do you mean the pump isn't up to the task?

I have mine plumbed to the rear and I have a one way valve installed in the line to stop the lines from bleeding when I hit the brakes.... I hate the stock sprayers and wanted to do this but wondering what you meant by the pump was not up to the task???

Well apparently my pump isn't strong enough. I only shoots the stream 2-3" above the resting wiper location and it's not due to the angle. I guess I can try to order a new pump.