10.60@133 DR750s stock weight

[Ray Pampena]

took my red 96 VR4 to the track on thursday. i went to trailer it there incase it breaks but my truck wiped out the hanger bearing about 40 miles from my house.. so i pulled the car off the trailer, left the truck on the side of the road and drove the car 4 hours to the track raced all day and drove home

i ran about 10-12 runs.. not one 11 sec pass very first run was a 10.95.. after that no run was slower than a 10.72 with just about every run being between 10.60 and 10.64 @ 131 to just over 133mph
the car is stock weight.. stock just about everything except all my hidden big power mods its even on side mounts and stock rubber intakes. i ran a set of MT drag radials in the front and my regular summer 555s in the back. i took off the catback thinking id get more power on the dyno but it didnt really work out that way

heres the 10.60 run..
R/T .015
60' 1.623
330 4.605
1/8 6.931
MPH 106.40
1000 8.953
ET 10.602
MPH 133.65

i dyno tested the car the day before heres the chart.

[CoopKill]

Nice! What fuel are you running?

[ChargerX3]

Awesome as always! That is flying! What were your mods on this car again?

[RealMcCoy]

Awesome times... You got that thing running strong. I bet you made a few domestic street cars wonder what they were doing wrong. lol

I think I see a typo up there. Unless you went back in time at 88mph...

[IPD]

nice job ray!

[Blackmount]

Nice job!

[vr4tune]

That launch picture looks awesome!

[Ray Pampena]

Thanks guys.. e85 3.1 heads and cams 750s afc maf translator with gm maf in draw through walbro 400 e85 version 1000cc injectors. Stock fuel system with stock filter and fpr stock rubber intakes stock sidemounts
Built trans with bellhousing brace and billet end cover rps 6 puck

[CoreyB]

Amazing. Nice work Ray.

[Kx1984]

cant wait to have u dyno my car

kx