Results 1 to 10 of 115

Thread: 3.5 DR750 build

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Sep 2010
    Owner Since
    12-22-98

    Location
    Coastal Delaware
    Posts
    162
    Thanks
    8
    Thanked 10 Times in 4 Posts

    3.5 DR750 build

    Just putting it out there the build is complete and the car is officially running .. Be on the street tomorrow ..

    I wanna give a really big "Thank You" to Monchrome and JasonY who put in alot of time over the last few days putting the engine together and getting the install done ..

    What a sleeper

    The new

    Merkel built 6G72 3.5
    DR Stage 3 heads ..pinned
    Unorthodox Racing Cam gears

    Fully built trans containing
    Quadco output shaft
    Quaffe front diff
    Bellhousing brace
    Broomfield Endcase

    AEM fuel pressure gauge
    Billet oil pump gears

    Deleted atmosphere Tial for a recirc Tial

    Basically replaced the entire old setup with brand new everything ..Deleted Meth injection ..

    This week after a shake down and break in I am swapping the springs for Megans and dropping 255/40/18 KDW's on.. Swapping the 255 for a Walbro 400 .. Adding the Ooga horn.. and swapping in the overclocked ECU ..

    Car will be run on pump gas or 100/104 unleaded which is readily available less than a mile away from the house ..

    Merkel 6G72 3.5
    DR Stage 3 Heads w/ High Rev Spring Kit .. Pampena pinned .. Stock Cams
    DR Port and Polished lower plenum
    DR Tial 750's w 18psi forge wastegates
    DR Arc-2 92mm
    Unorthodox Cam Gears
    IPS 750hp Anodized Precision Core Frontmount and hard piping kit
    Overclocked (8100 Rpm) ECU (Current) .. Chrome on the shelf
    Southbend Stage 4FE clutch
    Rps Lightweight Flywheel
    Greddy Boost Controller
    AEM Digital Gauges (oil- fuel -temp -boost- wideband)
    99 Lifters
    IPS Setrab 25 row Oil Cooler
    PTE 680 injectors
    KB Boost a pump (Installed but not in use)
    HKS DLI
    Walbro 400 fuel pump
    AEM FP regulator
    3SX fuel rail loop
    Ninja Performance Black Nylon Fuel kit
    IPS downpipe
    Tial recirc BOV 11psi spring
    Tein S-tech springs .. Swapping to Megan Coilovers anyday
    Carbotech Rotors
    Hawk Pads and Stainless brake lines
    Pampena Bellhousing Brace
    Quadco output shaft
    Quaffe front diff
    Bellhousing brace
    Broomfield Endcase
    Jack Hammer 7 quart oil pan
    Billet Oil Pump Gears
    Maximal Solid motor mounts front and rear
    Maximal Performance Adjustable Control Arms
    Ebay 4" Megan knockoff exhaust
    Krank vents
    Stock 18 Chromies w/ KDW 255/40ZR18's
    1 Oooga horn
    Last edited by Lugnut; 05-11-2013 at 11:41 PM. Reason: Adding to the parts list

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering