CoopKill's Mistress Makeover Thread [Pic Heavy]

[CoopKill]

You would think the brace blocking off the oil divertor (on the left) would be detrimental to the intermediate bearing-

I forgot to address this post. I purposely held the brace off the bottom of the case for this reason. There is about 3/32" room in a 4" path that oil can travel.

[mb3000]

What temperature is that coating rated for?

[CoopKill]

I will post info when I find it again. It is 1800* coating though.

[CoopKill]

@ 1685* tested by Ford on a 6l powerstroke

3% more effective at preventing heat loss compared to heat shields.

186* less at 1.5" vs heat shields

[R/T93]

With the meth you shouldn't hit that temp, without you may. I do.

From the phone.

[jbuhrman]

Hopefully the coatings won't wear off too easily I had bill take the turbine housing for my 6266 with him.

[CoopKill]

Small update, as the Mrs has kept me Honeydoing the past three days. Damn garden!

Got her welded up



Fuel pump hanger is ready for assembly, and install. I had to weld the feed, and nut, O-ring, and epoxy the return. No room for welding between them.

[CoopKill]

Oh, and I am not sure what UPS has going on vs USPS, but shipped lcdbc back to Antero for an update, and UPS is charging a $60 brokerage fee!?! USPS does not. Apparently the high school student that took my package at the UPS store had trouble discerning the word value, and transaction. So now I will have $100 in round trip fare for a box that is 3"x4"x2".

FU!

[futurevr4man]

people swear usps is bad and blah blah blah, but i use them 100% of the time. never had an issue, always tracks packages well, and ALWAYS the cheapest to deal with. i havent had a problem, maybe i am lucky?

[GTOJOE]

Never had a bad experience with usps. Bought countless things from vendors or members and had them all shipped international freight with usps not a single loss not even any real delays. Fedex and ups are just far too expensive.

Sent from my GT-I9300 using Tapatalk 2