Black Stealth LCD install

[green-lantern]

I've had quite a few people ask me for info so thought I'd go ahead and post this here. If people still want me to install it I guess I could be persuaded but I'm busy these days so I'm not too eager to do it anymore.

Info on taking the cluster apart
http://www.3sgto.org/f2/how-remove-t...ter-10625.html

Starting off, I did cut these out before with a die grinder and cutting wheel but some dykes and needle nose pliers works better and doesn't get a bunch of plastic dust everywhere.




You want to grind this pin down some. Hard to fit it in if you don't.




Next cut the plastic piece behind the tach face. I cut this one to high but it doesn't hurt anything. You only need to cut to the bottom of the hole not the top.





Take that nice new LCD screen and grind it up like this lol, you might need to shave the bottom a bit more later. Be careful not to go crazy when doing this. You don't want to damage the LCD.