Q?:trans max speed?

[thor'svr4]

I know about the 4th gear and I wouldnt be suprised if the dsm community has made a stronger gear otherwise for the 1/4 mile you can always rev higher and run taller tires
and as for the transfer case im willing to take a chance or maybe Ill come up with something to make it better

EDIT: unless you can find a way to change the front springs so that they arent hanging over the tires, i dont think youll be able to get taller tires on the car.


As far as the transfer case, ive hit the limiter in 4th many times and never had an issue. but i also dont have a vent on my transfercase. when i bought the car it was missing so i just stuck a rubber cork in the hole to keep dirt and stuff out. by the time the car was street-able i had completely forgotten about the rubber stopper and drove with it plugged for quite a while. no issues yet. although i like the idea of a breather tube much better.

[J. Fast]

Stock 6 speed usdm 7200 rpm


Stock 6 speed jdm 7200 rpm

can you revise for 8200 rev for both trans styles?

Thanks!

[green-lantern]

EDIT: unless you can find a way to change the front springs so that they arent hanging over the tires, i dont think youll be able to get taller tires on the car.

Coilovers

[anyonebutme]

can you revise for 8200 rev for both trans styles?

Thanks!

I have one ran out to 9K rpm for all 3 TT transmission if you want

Coilovers

You can run 33" truck tires with coilovers, lol. Can't turn though.....

[J. Fast]

I have one ran out to 9K rpm for all 3 TT transmission if you want
..

Yessir, that would be great. I need a close up of it. Where I can really look at speed vs gear vs rpm tho. The ones aaron@state posted in the gearing thread have 50mph step increments. They're pretty damn worthess to interpolate with increments that big. What do you have, Chris?

[vr4tune]

Jspec 6 speed at 8200


Usdm 6 speed at 8200

[anyonebutme]

Yessir, that would be great. I need a close up of it. Where I can really look at speed vs gear vs rpm tho. The ones aaron@state posted in the gearing thread have 50mph step increments. They're pretty damn worthess to interpolate with increments that big. What do you have, Chris?

Probably the same ones you have seen. I'll have to find them. it's an Excel graph.

[R/T93]

MFactory™ Competition Products - Performance Driveline Components

Go there, use gear ratios from a google search. Works well.