Results 1 to 10 of 10

Thread: Debunking multi-electrode spark plugs

  1. #1
    Member verified
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Fowlerville, MI
    Posts
    1,251
    Thanks
    42
    Thanked 48 Times in 41 Posts
    '92 Dodge Stealth RT/TT - Aug. 2012 COTM

  2. #2
    Twin Turbo verified
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    Melbourne, Australia
    Posts
    2,123
    Thanks
    76
    Thanked 91 Times in 75 Posts
    I thought the whole point of those was simply that they lasted longer?
    1990 JDM GTO TT with Vi-PEC plug-in V44 EMS, TD04-13T's, 3SX Downpipe, MP Hi-flow cat, ARC SMIC's, Aeromotive Stealth 340LPH pump, Fuelab 515 FPR, Ninja Performance 75amp hotwire kit, oohnoo fuel loop & rail adapters, Nylon braided ethanol fuel line, NGK AFX Wideband, K&N FIPK, Iridium plugs, HKS Twin Power DLI, Turbo XS racing BOV, 3SX poly mounts, Custom 280km/h speedo.

    Waiting install
    Injector Dynamics 725cc Injectors.

    Build Thread

  3. #3
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since

    Posts
    561
    Thanks
    22
    Thanked 15 Times in 13 Posts
    fun fact: some toyota motors come with dual post spark plugs STOCK, and don't run right if you put single post in.


    your article in invalid, especially when he says "there are twice as many posts to burn through"...well, you realize it is the center tip that wears, not the fingers? And there is only one center tip


    the point being, install what the manufacturer recommends. they design the car that way for a reason.
    Recertified ASE L1/L3 Master Technician
    13G's on Pump 93 tuned to 421awhp/419awtq @ 17psi tuned by Pampena Motorsports ....375awtq at 2900rpm....
    Billet 19T HL's on E85 tuned to .....?

  4. #4
    Frontline Fabrication verified
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Morgantown, WV
    Posts
    210
    Thanks
    19
    Thanked 24 Times in 18 Posts
    Quote Originally Posted by Keyan View Post
    your article in invalid, especially when he says "there are twice as many posts to burn through"...well, you realize it is the center tip that wears, not the fingers? And there is only one center tip
    You realize the Iridium in the center will wear MUCH less compared to the outside posts

  5. #5
    Forum User Not Verified

    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Cape Girardeau
    Posts
    4,791
    Thanks
    365
    Thanked 296 Times in 214 Posts
    Quote Originally Posted by Keyan View Post
    fun fact: some toyota motors come with dual post spark plugs STOCK, and don't run right if you put single post in.


    your article in invalid, especially when he says "there are twice as many posts to burn through"...well, you realize it is the center tip that wears, not the fingers? And there is only one center tip


    the point being, install what the manufacturer recommends. they design the car that way for a reason.
    the ground straps absolutely wear.

    The great thing about multi post spark plugs is they have plenty of pieces to get nice and hot to cause detonation.

    Parting 6 speed
    Pampena 3.5 Stroker, GTX 2867 Gen IIs, AEM Series2, oohnoo SMIC, DN Hardpipes, FIC 1650s, Walbro 525, aermotive fpr, Dejon intake pipes, Tial Q, Koyo Rad, Samco Hoses, Stoptech 332mm fronts, HKS GT4 Coilovers, Spec 4+ LW, JDM 6 Speed, Billet shift forks, Pampena brace

  6. #6
    Member Not Verified
    Join Date
    Nov 2010
    Owner Since
    2003

    Posts
    2,062
    Thanks
    112
    Thanked 272 Times in 206 Posts
    A lot of misinformation here.

    1. spark in free air doesn't test anything

    2. the point of multiple ground straps is not to "split" the spark

    3. A lot of manufacturers use multiple ground strap plugs stock, as do ALL aircraft. Some absolutely require them.

    4. Ground straps will not cause detonation unless something is SERIOUSLY wrong with your car, the edge of the exhaust valve is where most detonation originates from.

    5. The center electrode is where most wear can occur, which is why polarity is important. Some systems alternate polarity.

    6. Multiple electrode plugs are a class of surface gap plug. Someone who doesn't understand the principals of those will easily confuse the point of multiple electrodes.

    7. Because of 6, I can totally see why the carbon fouling issue wasn't talked about.

  7. The Following User Says Thank You to anyonebutme For This Useful Post:


  8. #7
    Forum User Not Verified

    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Cape Girardeau
    Posts
    4,791
    Thanks
    365
    Thanked 296 Times in 214 Posts
    Quote Originally Posted by anyonebutme View Post
    A lot of misinformation here.

    1. spark in free air doesn't test anything

    2. the point of multiple ground straps is not to "split" the spark

    3. A lot of manufacturers use multiple ground strap plugs stock, as do ALL aircraft. Some absolutely require them.

    4. Ground straps will not cause detonation unless something is SERIOUSLY wrong with your car, the edge of the exhaust valve is where most detonation originates from.

    5. The center electrode is where most wear can occur, which is why polarity is important. Some systems alternate polarity.

    6. Multiple electrode plugs are a class of surface gap plug. Someone who doesn't understand the principals of those will easily confuse the point of multiple electrodes.

    7. Because of 6, I can totally see why the carbon fouling issue wasn't talked about.
    Then why does anyone switch to a non projected tip plug or a surface type plug to avoid detonation? I have completed melted the ground strap on a plug before and the engine survived just fine. (stock tune, 14 PSI, lots of extended 4th and 5th gear high speed pulls)

    You can't say that plug wasn't glowing red hot.

    Every really old plug I've seen (like ones in a car for 100+ k) had an equal amount of wear on the ground strap and electrode. Some platinum type plugs had virtually no electrode wear, but the gap opened to like 70 thousands from ground strap wear. You could see half of the strap worn away.
    Last edited by Chris@Rvengeperformance; 12-20-2012 at 11:44 AM.

  9. #8
    Member Not Verified
    Join Date
    Nov 2010
    Owner Since
    2003

    Posts
    2,062
    Thanks
    112
    Thanked 272 Times in 206 Posts
    Ever consider the possibility that melting the strap saved the engine? Just because the weaker strap melted doesn't mean it was the only hot thing in the chamber.

    People switch to non projected tip and surface gap plugs so the can run a hotter plug than normally possible so its not fouling all the time.

    Single plats wear like that because only the center electrode has plat on it.

    Any case none of this has to do with multiple ground plugs. When the mix is hard to light as in aircraft or other stratified or lean burn engines, you'll usually find a multiple strap plug.

  10. #9
    Forum User Not Verified

    Join Date
    Sep 2010
    Owner Since
    2004

    Location
    Cape Girardeau
    Posts
    4,791
    Thanks
    365
    Thanked 296 Times in 214 Posts
    Quote Originally Posted by anyonebutme View Post
    Ever consider the possibility that melting the strap saved the engine? Just because the weaker strap melted doesn't mean it was the only hot thing in the chamber.

    People switch to non projected tip and surface gap plugs so the can run a hotter plug than normally possible so its not fouling all the time.

    Single plats wear like that because only the center electrode has plat on it.

    Any case none of this has to do with multiple ground plugs. When the mix is hard to light as in aircraft or other stratified or lean burn engines, you'll usually find a multiple strap plug.
    exactly. I'm glad there was only one strap to melt, if there were more there would've been a greater chance that cylinder continued to have active combustion and melted the piston.

  11. #10
    Member verified
    Join Date
    Sep 2010
    Owner Since
    Oct '08 - Oct '10

    Location
    Royersford, PA
    Posts
    3,814
    Blog Entries
    1
    Thanks
    1,059
    Thanked 442 Times in 317 Posts
    Early Mk2 GTIs came with triple ground strap plugs from the factory. They switched to single ground strap plugs in the later Mk2 GTIs like mine. VW then switched back to the triple ground strap plugs and they still use them. Meh.
    R135
    ╚╬╬╝
    - 24

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering