Results 1 to 6 of 6

Thread: Check Engine Light Flashes When Stopped??

  1. #1

    Check Engine Light Flashes When Stopped??

    OK, so I'm driving, and I get to a stop sign, and I look down, to see my CEL flashing nonstop? When I started driving again, it disappeared, only to reappear when I stopped again? The car is driving fine, there are no other issues that I know of besides the ECS. It does it randomly, no rhyme or reason as to when it will or won't do this. Only happens when I'm at a dead stop though. Anyone got any idea? I've never heard of this before.

  2. #2
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Medford OR
    Posts
    1,420
    Thanks
    5
    Thanked 602 Times in 302 Posts
    What year and model car..?


    Real Performance Automotive (541)816-4500 www.FB.com/RealPerformanceAuto

  3. #3
    94 vr-4

  4. #4
    The one. The only. verified
    Join Date
    Sep 2010
    Owner Since
    August 28, 2002

    Location
    SWPA
    Posts
    4,042
    Thanks
    182
    Thanked 699 Times in 529 Posts
    Well, I know when checking codes on a 94/95 and grounding the proper pin (the pin # escapes me right now) that if there are no codes that the CEL will just flash. I guess its possible a wire is getting pinched in either the clutch pedal or brake pedal is pinching a wire.

    I actually had an issue once where a small bundle of wires had made their way from under the dash and every once in a while when I pushed the clutch in it would pop the ignition fuse. That one took me a few days to diagnose.

    [06-05, 19:29] OhioSpyderman: Brian, finding a woman is NOT the answer, you need to shop for a good VACUUM

  5. #5
    Forum User Not Verified
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    Medford OR
    Posts
    1,420
    Thanks
    5
    Thanked 602 Times in 302 Posts
    As stealthee said, the 84-95 hybrid ecu will flash the codes at the CEL if the diagnostic output terminal is grounded. If there are no codes, you will get a steady flash. The possibilities are a wire grounding out, a problem with the ECU, or a problem with another module on the system.

    If it's still plugged in, my money is on the ECS computer...

    You can confirm the theory by monitoring the voltage on pin 1 of the DLC, if it gets pulled low when the light starts flashing, you know you're on the right track, then you just have to find where it's being shorted...

  6. #6
    I'll try unplugging the ecs computer. There are a few mystery issues with this new car. It also doesn't measure air volume at the DLC, even though the maf is sending a good strong signal to the ECU. Thanks for the help guys. I'll check it out and report back.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering