cams

[keo92stealth]

Anybody know who regrinds our cams besides delta cam and webcam ? Delta cam doesn't make the grind I want and webcam is pricey . Would be nice to know who makes dr cams .thanks

[Hans@GZP]

Here are brand new cams... don't worry about regrinds and lifter shimming.

Brian Crower Camshafts | Ground Zero Performance

[anyonebutme]

BC also doesn't make the grind he wants.

[Hans@GZP]

Well, I don't have ESPN... how am I supposed to know what he's looking for?

[anyonebutme]

Because he said Delta doesn't have the grind he's looking for.......

If I had to guess, he was looking to actually make some power with cams and looking for something similar to FP's 272 grind.

[3000gttom]

what kinda grind do you want?

[TurboSinceBirth]

Delta makes camshafts for 3 or 4 vendors at least. I'm not too sure where else you can go. I'm pretty sure webcam makes DR's cams also.

[keo92stealth]

Sorry guys . I have confused some of you. I did have a set of 280 degree cams from delta cam . I didnt like them due to the fact I had to use the solid lifter. And the guy from delta cam says they dont make the 280 degree cam without having to use the solid lifter. He said the 272 is the biggest grind they make that uses shims. Any bigger and you have to use solid lifters .

That to me makes no sense because other vendors sells regrind cams and they all use shims . Matt even uses shims on the huge profile cam he makes . The 292 lol.

[TurboSinceBirth]

Sorry guys . I have confused some of you. I did have a set of 280 degree cams from delta cam . I didnt like them due to the fact I had to use the solid lifter. And the guy from delta cam says they dont make the 280 degree cam without having to use the solid lifter. He said the 272 is the biggest grind they make that uses shims. Any bigger and you have to use solid lifters .

That to me makes no sense because other vendors sells regrind cams and they all use shims . Matt even uses shims on the huge profile cam he makes . The 292 lol.

Are you sure his goes that big? I didn't think it did. I was under the impression his street/strip cams were a 264/272 or 272/264 something like that and the race cams were a 272 or 280 maybe a mix.

[keo92stealth]

If I'm not mistaken , I seen that on the other site a long time ago.

It was listed like this ...

Street 272
Street/strip 282
Strip 292

I'm probably wrong but I seen that before .