Should I Hotwire?

[NickS VR4]

The heavier gauge (lower number bigger wire) will have less resistance not higher resistance.

-Chris

Really? I thought the thicker the wire, the more resistance, but allows for greater amp flow.

Oh well, doesn't matter. I will probably replace the wire with better wire. And thanks for the ARC2 tip.

Sent from my Galaxy Nexus using Tapatalk 2

[futurevr4man]

if overwhelming your FPR is the biggest issue you are facing, why are you waiting!?

and no... electricity takes the path of least resistance. more wire = more path = less resistance

[NickS VR4]

I'm waiting cause first thing I did with this project was to pull the motor. Have a ton of parts to install now when I do a preventative rebuild along with a lot of other upgrades.

[CoopKill]

What are symptom or fpr over-run? Running a wally 400, and seeing 10:2 at wot.

[anyonebutme]

super rich idle and wack fuel trims. doesn't effect WOT, only idle.

[green-lantern]

super rich idle and wack fuel trims. doesn't effect WOT, only idle.

Wouldn't it depend on how bad you are over running it?

[anyonebutme]

it's damn near impossible to overrun a regulator at WOT. the only reason it over-runs at idle is the injectors demand such a small amount of fuel vs what the pump is flowing.

[IPD]

it's damn near impossible to overrun a regulator at WOT. the only reason it over-runs at idle is the injectors demand such a small amount of fuel vs what the pump is flowing.

thanks, that's much better than how i was trying to explain it.