What did you do today to your 3/S?

[DuTTch]

I put a nice shiny 3sx radiator cover on my coolant cap on my 95 base.

[J. Fast]

Installed my Tein S Techs and rear camber arms.

Turned out great! do you have a before vs after (other than your sig pic?)

[Polygon]

Turned out great! do you have a before vs after (other than your sig pic?)

Yep!

Before:





After:

[gltasn]

thanks for the above pics! i have the tein s springs and arms sitting in the garage. i wanted to put them on but was too vain and worried how the wheels would look cause they stick out about an inch like yours but, looks wise, its not bad at all.

[Polygon]

Trust me, just looking at you car in your sig pic I will tell you that it will look a thousand times better. The wheel gap just makes them look awkward. It will have a nice sexy stance when they're on. Plus the springs and arms shouldn't take you more than four hours to put on.

[gltasn]

did you use a spring compresser? i have perm damage to one thumb from undoing the spring on my 72 pickup and it bent my thumb completely backwards. at least i learned and will never do that again.

[dpartinvr4]

seats and wing got done over the weekend, along with plugs, wires, coil back and DIS-4

[Polygon]

did you use a spring compresser? i have perm damage to one thumb from undoing the spring on my 72 pickup and it bent my thumb completely backwards. at least i learned and will never do that again.

Always!

However, I found I only really needed it to get the front springs off. The new front springs went on without it. and the rear came off and went on without it. Although I used the spring compressor on the first rear one to be sure first.

[95_GTO]

Apparently after all this nice weather we've been having, there's predictions for a winter storm. So just in case it does happen, I put my winter wheels back on, partially.
Photo_041911_001.jpg

[93STLTH]

seats and wing got done over the weekend, along with plugs, wires, coil back and DIS-4

Just curious, but why did you go with blue in a red car?