What did you do today to your 3/S?

[Blackmount]

I have two on mine...

[2fnloud]

You have a solid bushing in each ring under the center column?

[DrGonzo]

Where is the "one need one bushing"? The ebay one you posted looks like the underhood bushings.

I have two on mine...

You can see in this pic that the one on the lower right that is attached is really small. There really is not a rubber bushing in that one. The otehr one has the solid one in it hence buying the kit and only using one. That solid bushing is the same ones that are used under the hood.

[Noodlez94]

Found out the bolt to the front motor mount was missing so installed a new bolt smooth shifting now

[Blackmount]

Oh I was speaking of the bushings on the transmission side.

[anyonebutme]

I guess this qualifies as doing something to my 3S.

Brake duct entrance piece CFD simulation:

[Blackmount]

Cut up my shitty short shifter, welded parts from stock shifter on it... Its now a pretty nice shifter , added new bushings, and adjusted linkages. Bolt action shifting is win.

[Rakuny]

What I did today..

New dust shields and wheel bearings



also bought these..
evo 9 MR Bilsteins!


when the car is done I will set it down on them to weigh the car and get the information needed for Bilstein to revalve the shocks to my specifications. I'll also be fitting coilover sleeves, etc.

[NOMIEZVR4]

Just contacted the ebay seller for a set of bushings...can't wait to get mine.

[Chris GTO TT]

I think I got my coolant leak fixed at the drain petcock by replacing the petcock... So far no leaks