Misc Used OEM Parts

Parts are from a 94 3000gt VR4, some american, some japanese. I take paypal only, and prices are only good for the US. Click on images to be taken to a larger one.

Shipping will be through USPS Priority mail or first class depending on weight. Over 50 dollars will be insured. Parts are sold as is.


Stock BOV, the one with out the vac line. Diaphram just tested, no leaks.
--20 shipped each
http://i40.photobucket.com/albums/e2...4/DSC00114.jpg

Thermostat junction block with sensors.
-- 50 shipped
http://i40.photobucket.com/albums/e2...4/DSC00115.jpg

J-spec "pre-cats" - Rear has no cat material, NO O2 Bungs
--70 shipped
http://i40.photobucket.com/albums/e2...4/DSC00116.jpg

Power steering pump, worked fine when removed, pulley has surface rust.
--45 shipped
http://i40.photobucket.com/albums/e2...4/DSC00119.jpg


J-spec 2G starter - Not tested, Rest of the motor was in good shape though
--50 shipped
http://i40.photobucket.com/albums/e2...4/DSC00121.jpg


SOLD:
J-Spec coil pack set
J-Spec Injector resistor pack
Crank angle sensor
Cam angle sensor
Set of stock wastegate actuators
BOV with vac line

J -spec PTU - Used it for a month no problems, can include bracket if needed
--50 shipped
http://i40.photobucket.com/albums/e2...4/DSC00122.jpg

Power steering tensioner - Has surface rust on pulley, pulley spins freely
--25 shipped
http://i40.photobucket.com/albums/e2...4/DSC00123.jpg

Rheostat assembly - worked fine when removed
--25 shipped
http://i40.photobucket.com/albums/e2...4/DSC00127.jpg

Stock FPR - Worked fine when removed - Diaphragm has no leaks
--15 shipped
http://i40.photobucket.com/albums/e2...4/DSC00130.jpg

Set of 2G turbo manifolds - Tubular one is cracked 3/4 of the way around - Will include support bracket in pic
--45 shipped
http://i40.photobucket.com/albums/e2...4/DSC00132.jpghttp://i40.photobucket.com/albums/e2...4/DSC00133.jpg

Stock fuel rail loop
--10 shipped
http://i40.photobucket.com/albums/e2...4/DSC00134.jpg


SOLD:
J-spec 360 injectors
Engine Damper
3sx EGR block off plates

Bubble and intake pipes - Need a cleaning
--50 shipped
http://i40.photobucket.com/albums/e2...4/DSC00136.jpg

Oil dipstick and tube - Dipstick has surface rust
--20 shipped
http://i40.photobucket.com/albums/e2...4/DSC00137.jpg

Crank timing belt pulley - Has surface rust - Whats in the picture is what you get
--25 shipped
http://i40.photobucket.com/albums/e2...4/DSC00140.jpg

A/C tensioner Bracket
--15 shipped
http://i40.photobucket.com/albums/e2...4/DSC00142.jpg

Door stop thing lol, not sure what it is called. Does not include arm, seemed fine when removed.
--5 shipped
http://i40.photobucket.com/albums/e2...4/DSC00143.jpg

Hard intercooler pipe on front of motor
--15 shipped
http://i40.photobucket.com/albums/e2...4/DSC00144.jpg

Fan resistor from a 1st gen fan assembly - Worked fine when removed
--15 shipped
http://i40.photobucket.com/albums/e2...4/DSC00146.jpg

Coolant reservoir cap with hoses
--10 shipped
http://i40.photobucket.com/albums/e2...4/DSC00147.jpg

SOLD:
Top Timing belt covers - No cracks
Rear injector harness

Timing tensioner bracket - Has some rust
--15 shipped
http://i40.photobucket.com/albums/e2...4/DSC00155.jpg

Set of 2nd gen heads - Stock, 90k on them I believe - Includes everything shown, cams have surface rust, should be able to clean them though, and cam gears have rust. Heads were working fine when removed, but should be cleaned and lifters replaced at a minimum, they came from a motor that spun a bearing. Currently coated in LPS-3.
--275 shipped
http://i40.photobucket.com/albums/e2...4/DSC00150.jpghttp://i40.photobucket.com/albums/e2...4/DSC00151.jpghttp://i40.photobucket.com/albums/e2...4/DSC00152.jpg

Misc engine brackets and heat shields - Make offer (keep in mind shipping from Hawaii is normally a bit more) and tell me which picture and location ex. 1st pic, bottom middle etc...

Pic 1
http://i40.photobucket.com/albums/e2...4/DSC00145.jpg

Pic 2
http://i40.photobucket.com/albums/e2...4/DSC00148.jpg

Pic 3
http://i40.photobucket.com/albums/e2...4/DSC00141.jpg

Does that ptu only have one month's worth of driving on it?

No, it was on the J-spec motor I picked up. The motor was only suppose to have about 20k miles on it. I ran the ptu for a month to make sure it was working right.

I sent you an email. Sorry for the slow responce, I just started my second job yesterday. Let me know as soon as you can...

Thanks

Coil pack and Injectors sold.

If you need a part here, make an offer.

Resistor pack sold.

Crank angle sensor sold.

Timing covers sold.

cam angle sensor sold.

:bump:

hi! i need some precats! thanks, -jared-

Sorry, I don't have any.

1 BOV, and wastegate actuators sold.

i'll take block off plates! thanks jim 814)493-3173

TTT Block off plates still available.

i'll take egr block off plates! Jim(814)493-3173

you still have rear injector harness? if so sold(if tt if single 6pin plug on one end and 3 inj plugs on other? ship with blockoff plates and give me price to 16319 Nw.Pa.

EGR plates and rear injector harness sold.