Printable View
Maybe im looking in the wrong place, but i cant find a front o2 housing for my 91' vr4 anywhere. My bolts are rusted to shit and i need a new one to put on my new downpipe.
Can anyone point me to the right place to find it?
http://i3.photobucket.com/albums/y73...n/IMAG0042.jpg
those bolts are so rusted, the precat was barely hanging on
I'll sell you my front one if you want a good used on, shoot me a PM if your inerested.
if most everything is stock. Look at your altinator. Your O2 pig tail is mounted and bolted to a braket at the top. follow the wire down to the other side of the pipe from the picture show. Your looking in the wrong place for it. Would also help if you get yourself a service/repair manual. Than you will know where everthing is. LOL.
He knows where it is, he just wants to know where to find a new one.
That's not what he said. Not at all. He say he can't find it at all. look at the pic. not even close. He never says where can I get a replacement. He says "Can anyone point me to the right place to find it?"
He's not going to find a new one down there. LoL.
i did ask where to buy a new one, and also, it might not be the BEST pic, but it is there showing the bolts which are the cause of needing a new one, lern2reed. thank you austin.
1) "i need a new one to put on my new downpipe. "
2) thats a picture of the front 02 housing...
did you break the bolts off already?
i havent broken them off yet no, do you think its salvageable?
Which style O2 housing did you need to get? Factory short O2 housing, or one with a precat eliminator built in?
For what it's worth, that doesn't look any worse than the one on my '94 looked.
Need the stock short one, going to see just how bad it is when I get home today and maybe try drilling them out if all else fails.
they don't look any different than mine. Exhaust bolts rust. Use PB blaster and a big breaker bar or impact if you have it.
If you do happen to break them off you can always convert to bolts.
Lower part of one of the bolts snapped right off.. heh. Whats the best way to get whats left out? Drill straight thru the middle and hammer out whats left or something else?