**UPDATED**
1. VR4/TT Oil Cooler
2. Stock VR4/TT Bubble Air Splitter w/ pre turbo intake pipes.
Printable View
**UPDATED**
1. VR4/TT Oil Cooler
2. Stock VR4/TT Bubble Air Splitter w/ pre turbo intake pipes.
:bump::bump::bump::bump:
just a fyi I just used the RFL bov adaptor that came in the box with the bov ,along with a 1/2" pvc plug from home depot. works fine. cost $.66 cents
Which mount bracket are you lookking for? Front of engine or front of car? I have a water outlet, and oil filter housing for sure. Probably have the bracket as well.
Yea the front engine mount bracket because the one that comes on the R/T NA is too big and can't fit a turbo there :D. Link some pics and how much you want for em.
And thanks CBR!
Bump.
Should get ecu and harness aswell. Do you have an oilpan?
I'm just going to modify the stock r/t one
Update bump
Do you need the oil lines too? May have all of that
Naw but thanks
:eek5::bump::bump::bump::bump::bump::bump::eek5::l oveyou:
i should have the bubble and the rubber lines that go to each turbo if i do how does 40 shipped sound?
Did you ever get an oil cooler?
I dont have the bubble, but I have the factory pre turbo inlet pipes. And all the rubber charge hoses.