1g RT/TT Body Parts, Engine components

Headed back up to NY for the summer so I'm looking to get this stuff sold in the next few days to pay for it.

Stuff I have currently disassembled and ready to go:
$20+shipping - RT middle tail light strip (have 2)

$75 shipped - 1g RT tail lights.

$20 shipped - Harness for the tail lights. Also have the reverse/backup harness but I would need one from a 3000GT in exchange. If you have the reverse light harness from a 3000GT, I will trade you both of these harnesses

$10 shipped -Dimmer switch (cracked, and the dimmer likes to back out)

$10 shipped - Power Mirror Control

$35 shipped - Aftermarket Steering Wheel (no hub or adapter)

$40 shipped - Set of factory non-Infiniti speakers and 2 Infiniti Speakers that were for the doors. Cones aren't connected to the sides anymore so they're fairly well worn I'd say. Could probably be salvaged using filters to prevent very low end noises.

$30 shipped- Factory 360cc injectors. Look rough but ran good.

$40 plus shipping - Black doors. No caps or parts, just the metal.

$50 plus shipping - 1st Gen R12 AC system. Charge leaked out quickly for me. May just need new o-rings, don't know, don't care. This is the lines, compressor, condenser.

$25 - Metal Y pipe. Not sure of brand. Upgraded to a front mount.

$20 - Factory Y pipe.

$110 shipped - Set of 5 Precision Turbo Engineering 550cc injectors. Have less than 10k on them. Another one can be purchased for about 60 bucks online (via nolimitmotorsports or Horsepower Freaks), or Precision Turbo says that they will sell a 6th one that's matched to the set for 80.

$50 shipped - Set of factory motor mounts. Some cracks in some rubbers, but on the whole not too shabby. I'll get pictures up later.

$50 shipped - 1g Steering wheel (in need of recovering) and airbag with radio controls.

$25 shipped - Water pump with about 5k on it.

$30 shipped - Timing Belt Tensioner and Idler pulleys. Have about 5k on them. Look to be in okay shape.

$40 shipped - 92-99 OEM crank pulley.

$30 + shipping - Black 2nd Gen 3000GT Door Caps. Shipping will be through Greyhound, probably around 50-60 I suspect.

$40 shipped - Older HKS Type 1 square turbo timer with harness. Silver.


Make an offer if you don't like my prices.

At this point I'm looking for the back up light harness from a 3000, and the preset +1 -3 Cam gears.

where are u located??

37322

To the top

How many miles are on the injectors? 360cc right?

Also pics on side skirts?

Yes, 360cc injectors. Car has roughly 170k on it, previous owner had the injectors flow tested before I bought it at 160k although that was about 2 years ago.

Still working on getting the side skirts off, the metal lip that the skirt butts up against underneath has gotten bent and smashed over the top of some of the bolts so I'm having to try to cut that with a dremel which is rather time consuming.

http://i12.photobucket.com/albums/a2...ps74227ec3.jpg

Only picture of the skirts I have on hand.

Np, thanks! Same thing happened to my driver door side skirt. Metal bent over bolts because last owner :/

Yeah, so long as you're willing to give me a couple days I can hopefully get them off. The skirts themselves are actually in pretty good shape though.

Quote:

---

Originally Posted by sergechronos

Yeah, so long as you're willing to give me a couple days I can hopefully get them off. The skirts themselves are actually in pretty good shape though.

---

I'm gonna hold off for now, but thanks

I'm looking for a PS turn signal/snake-eye, do you have one?

Nothing extra. These are parts that I am upgrading. Haven't been able to do a front end conversion yet.

Bumpity bump. Buy my stuff cause it makes you cooler than your friends.

Might be interested in the following:
$30 shipped - Timing Belt Tensioner and Idler pulleys. ---- Are these OEM?

$40 shipped - 92-99 OEM crank pulley. ----- Age and mileage on this?

The pulleys aren't OEM. They're Koyo I believe.

Mileage on the pulley is only around 90k. It's in pretty good shape.

Ah, I will pass on the pulleys then. Do you have pictures of the crank pulley? How is the rubber on it?

http://i12.photobucket.com/albums/a2...ps09380e55.jpg

Those yellow spots are just spots of pollen that I need to clean off. Rubber as you can see though is in excellent condition.

Haha I won't lie... it is hard to see, but I'll take your word for it. PM me your paypal? Also I noticed that you said these are the parts you "disassembled and are ready to go". Are there other unlisted parts?

Well, in the midst of reassembling the engine bay, so these are what I know for a fact I either wont be using or already have replacements for. Aside from this I think the only other stuff I may not have listed would be some brackets for the heads, I think I have some door handles floating around here some where, a passenger side window and couple of those door triangles. Haven't gotten any of that stuff cleaned up to evaluate it for selling it yet. If you're interested in any of that I can take a look at it later this weekend.

Doesn't sound like stuff I would need. I'll check back for updates if anything. Thanks :)