Maximal Performance Oil Cooler Kits are here!

http://www.maximalperformance.com/im...er-500x500.jpg

Link: http://www.maximalperformance.com/30...-cooler-kit-3s

Details:
The ultimate 3S Oil cooler kit is here. Utilizing a massive Setrab core and quality rubber lines with 8 AN fittings we're able to deliver you a kit that will cool better than any other, fit in the stock location using an included bracket with most setups, and keep it affordable. See below for details...

The Core - Setrab has long been knowing as the leader in oil cooler cores so of course we utlitized one of their cores. Measuring 1.83" 5.5" x 13" and utlizing 19 rows it will maximize cooling while still fitting in the stock location.

The Bracket - No flimsy L brackets here where your'e left up to figure out how to mount this thing. Maximal's cooler includes a heavy duty aluminum bracket completely surrounding the core for secure moutning. It utilizes the stock mounting points and includes 2 sets of holes...one to mount it in more of a stock location and one to move the core back towards the wheel which typically provides enough clearance for FMIC piping. If that doesnt' work the mounting tabs are plenty large enough to make your own holes to mount.

The Hoses/Fittings - To save assembly time and cost we decided to use Russel Twist-Lok hoses and ends. With a 250psi rating they are plenty strong enough for the application and are more flexible and thus easier to install than steel braided lines that, for the most part, are just for looks. AN adapters will thread into the stock oil filter housing. AN adapters are also included for the top of the oil cooler and should be torqued to 29.5 ft lbs.



Due to some fittings being on backorder I only have a couple ready to ship. I'm hoping to have more fittings by the end of the week and a few more will ship then. More cores and hose are coming late this week early next to fill any orders that this first batch won't so unless I sell a bunch more than expected anything should ship within a couple weeks.

If you have any questions...let me know. Introductory pricing will be valid for the rest of this week.

Hmm. May snag one tonight :)

From the phone.

Awesome! And I'm interested in feedback from anyone who does pick one up to...as usual I'm up to improving this in any way I might have missed. :)

Just saw these on the site. They look awesome and a good price.

I most likely will be ordering one too but I won't need it until middle to late March. Looks like good timing per your comments on availability. Is the price an introductory price? I wouldn't want to order right now just to set it on the shelf if someone else needs one right away.

Yeah, regular price right now is $329.99 compared to the introductory of $309 that'll last for a week or so.

You got any mounted pics Terry?

Nothing great, just one from the test-fitter...hope Greg doesn't mind me sharing his pic. :p

http://3s.gonzoinc.com/albums/userpi...2/DSCF1887.JPG

Quote:

---

Originally Posted by Maximal

Nothing great, just one from the test-fitter...hope Greg doesn't mind me sharing his pic. :p

---

LOL.. Nope use all the pics I sent you if need be.

Are you going to be offering the core and mount without the lines? I already have -8an lines I would want to use.

Looks great.

Sorry Terry but I am going to have to wait for summer on this one :/

Quote:

---

Originally Posted by Beef6

Are you going to be offering the core and mount without the lines? I already have -8an lines I would want to use.

---

Yeah, I don't see why not. If you're interested let me know and I'll work up a price for you.

Quote:

---

Originally Posted by R/T93

Sorry Terry but I am going to have to wait for summer on this one :/

---

No worries, they should still be around come then.

Core only is now an option...if you guys are interested in just the lines I'll be creating a separate product page for that...

http://www.maximalperformance.com/st...ooler-kit.html

Lines are now available separate: http://www.maximalperformance.com/st...ler-lines.html

Any pictures of this installed with a cx racing fmic? The piping is different then the picture you posted and Im concerned about fitment. Im sure I can make it fit just curious if anyone else has already. Once my tax return shows up ill be ordering.

The picture he posted is of it test fitting on my car. I run a CX Racing FMIC. The pipes you see I cut cause it was a fucking pain trying to get that s-curve pipe into the hole with all the other stuff. So I cut it on the straight and use a coupler.

With the CX FMIC you will need to modify the mount mounts but it will fit. Then again with the CX FMIC I had to modify the mount points to get the stock one to fit due to how the pipes were designed, there is no way around it.

Awesome, thanks Drgonzo. Any finished pictures with all of the piping installed? Now if my tax return would just show up I could get it ordered and once spring gets here get it installed.

Taking Gregs suggestion I did put an extra set of mounting points to allow for it to be mounted further back which helps with some fmic clearance problems. With all the different setups out there it's impossible to make it fit with everything but as a way to make it work with anything I did make the mounting tabs large giving you plenty of room to drill your own holes to make it work.

Yupp..Waiting on my tax refund to arrive to jump onboard the flash ECU train and snag this to replace my oil cooler. Looks good though.

Nice! Have one sitting in stock right now and waiting on more coolers to get here for yet another batch. Once this one in stock is gone the introductory price will be over.

Bump!!

No delay on shipping these now. Unfortunately the introductory price did lapse though.

Hey Terry, I installed the kit on a buddies car. Amazing quality and awesome product!! I would deff buy this!

Thanks!

That core bracket is a good idea, looks good.

TTT for those guys who haven't seen this yet.

Just finished yet another batch of these. Cooler kits and lines are in stock and ready to ship.

Another batch done. Another bump!

In stock and ready to ship!

Let's bump this!

To the top!

Wish I would have got this one instead of buying one from that dirty German! Ha!

:D

:p

I mean there's no reason you can't upgrade. ;)

In stock ready to ship!

Terry the 2 fittings that go into the filter housing dont have o-rings, is this something you could have forgotten? I threaded the old crush gaskets from the old banjo bolt onto the new JIC fitting but there they fit poorly, I believe its meant for o-rings. Any input on this?

Quote:

---

Originally Posted by R/T93

Terry the 2 fittings that go into the filter housing dont have o-rings, is this something you could have forgotten? I threaded the old crush gaskets from the old banjo bolt onto the new JIC fitting but there they fit poorly, I believe its meant for o-rings. Any input on this?

---

Nope, they should seal fine without anything. If you have any leaking let me know but I haven't had any problems with my setup or heard any other complaints.

Let's bump this again.