whats up guys. got a question. my car stalls when push on the clutch or when i let off the clutch. so im guessing its a vaccum leak or the biss screw is to low? any suggestions?
Printable View
whats up guys. got a question. my car stalls when push on the clutch or when i let off the clutch. so im guessing its a vaccum leak or the biss screw is to low? any suggestions?
Have you tested the IAC?
test it how? clean it?
There are 6 pins
123
456
Test the resistance across the pins of (1;2) (2;3) (4;5) (5;6)
It should read around 28-32 ohms if memory serves. If you get nothing on any combo, then the IAC is no good.
Read this. It tells you how to test and clean the IACQuote:
Originally Posted by keo92stealth
Stealth 316 - ISC Servo Motro
Are your rpm's jumping around?
Zach.
Damn beat me by a minute!Quote:
Originally Posted by stealthee
no not really. just stalls out when i push on the clutch to stop or when i let off the clutch. could the biss screw be to low in the throttle body? cutting off all the air? perhaps lol?Quote:
Originally Posted by OhioSpyder'sKid
What does your car idle at?
If your biss was in too far, your car's idle would be low to begin with...
i have big cams. she idles pretty high actually. but i remember when she was stock and i talked to 3sx over the phone about her stalling out . they said it was beacause of an intake leak? and i did have a few leaks,but that was a long time ago. maybe its the same deal?
I had the same problem with my car about 2 years ago. The car would stall when i pushed the clutch in. Later on the problem developed into the car idling really high when i pushed the clutch in and then driving normal for awhile till id push the clutch in and it would stall.
I decided to test the IAC one morning after starting the car and it was idling high. Pins 2 & 3 read dead. Plugged it all in and started the car. It ran fine. Pulled it apart and pins 2-3 read fine. Plugged it all in and started the car and it ran high agian. Tested agian and pins 2 & 3 were dead.
Turns out the IAC was otw out and once i replaced it my car ran perfect. Sounds like your having the same issue i was so id test the IAC.
I have my car set to idle around 1k and she never stalls on me. So if ur car idles high then that cant be the problem.