Midwest Turbo Connection is looking for a pilot TD05 car that wants Billet Wheels

Hello everybody!

What we are looking for is someone that already had a TD05 setup car with all supporting mods capable of handling 600-900+???awhp. We dont really know how much hp these will make in a TT application on a 3s but on a Evo VIII test car it made over 650 awhp.

We would need you to send your TD05's in and we would upgrade them/rebuild them with our new Billet MTC TD05 wheels. The compressor wheels are slightly smaller then 20G wheels however in an Evo they actually have made more power then a 20G wheel. They are a Twin 5 blade design. We also would have 3 options for the turbine shaft, one is a 12 blade, one is an 11 blade, and the other is a lighter 9 blade what would make your TD05 Billet Spool ridiculously fast for a TD05 car.

Price:
We would charge you for the parts only. Our only stipulation is we would require you to get the car dyno'd within 3-4 weeks of receiving the turbos back. We would initially charge you for labor but once you sent us your dyno charts, pictures, video's whatever you have you would get all of the labor costs refunded to you (think of it as an incentive to actually get the car dyno'd and send us the results).

We are looking for a car that has all the supporting mods and has a healthy engine. If you are interested, please list all your current mods and any dyno information you may have right now.

Thanks for looking!

Update as of 9-29-11:

Familyman has stepped up to be one of our test vehicles. He will be getting what are basically our stage 1+ turbos (official name will come at time of release to public). The stage 1+ will feature a Twin Five Blade Billet Compressor wheel along with an 11 Blade upgraded turbine shaft.
The stage 2 & 3 feature a Twin 7 blade compressor wheel (76mm and 83mm exducers respectively, until we release them for sale publicly we are keeping most of the specs private hehe) and either a 9 blade or a 12 Blade (12 blade for those that want ridiculous power).

Just as a teaser, a crappy cell phone picture of our 83 mm Billet Compressor wheel. ;)

i wish i was TD05. good luck finding someone whos ready to hit the dyno, hopefully you guys get some great numbers.

I used to have a good TD05 kit. I wish I still did. I'm curious about the results on the turbos particularly how soon they spool.

Subscribed!

How about piloting a billet borg warner K-04 wheel into a TD-04 too, Dan!

TD04 Billet wheel will be next and K04 after that. We actually are going to take the design from the TD05 and use it for the TD04's because it gave such good results in the TD05 form. Dimensionally it will be about the same size as a 19T. But it will be utilizing a fresh blade design which greatly improves performance. The TD04 and K04 wont be coming around until the beginning of the new year though.

PM sent.

Intropy would be a good one (if he has time). He's a hell of a guy with a hell of a car. Baad VR4 is a great guy too.

http://www.3sgto.org/members/intropy/


pic of his car in this thread
http://www.3sgto.org/f2/streets-la-6323.html

I'm going to dyno at FSR next week. Depending on how that goes I might be interested.

Dan you know im in for the billet 19t! ;)