My C6 Z06 Build

So I guess I'll start my thread... a little late since the car is almost together, but better late, than never :rofl:

So I got an 08 z06 mostly stock, had a vararam intake and a tune

https://lh3.googleusercontent.com/-5...232576fe_b.jpg
https://lh5.googleusercontent.com/-0...163527_707.jpg
https://lh6.googleusercontent.com/-2...171744_015.jpg
https://lh4.googleusercontent.com/-I...162455_606.jpg
https://lh4.googleusercontent.com/-C...162512_998.jpg
https://lh5.googleusercontent.com/-i...163604_666.jpg
https://lh4.googleusercontent.com/-L...163516_427.jpg
https://lh3.googleusercontent.com/-v...163543_340.jpg
https://lh3.googleusercontent.com/-C...163553_494.jpg
https://lh5.googleusercontent.com/-Y...163601_899.jpg
https://lh6.googleusercontent.com/-W...163502_135.jpg
https://lh5.googleusercontent.com/-T...163613_911.jpg

nice looking ride!

what are your plans/goals for the build?

Quote:

---

Originally Posted by sketch

nice looking ride!

what are your plans/goals for the build?

---

1000+ rwhp :D

So I decided to do the calipers in a very close color to the color of the car
http://f.a.d-cd.net/812d298s-960.jpg
http://c.a.d-cd.net/a92d298s-960.jpg
http://g.a.d-cd.net/152d298s-960.jpg
http://d.a.d-cd.net/f52d298s-960.jpg

Got the led taillights and tinted them
http://h.a.d-cd.net/6e4b298s-960.jpg

Engine Specs:
- LSX Block
- All-Pro Heads with oversized Titanium intake valves and Nitronic exhaust valves
- FAST Intake Manifold
- Nick Williams 102mm TB
- Callies Magnum Crank
- Callies Ultra XD Rods
- Ross custom piston with low compression (9.5:1 for turbo application)
- Meziere WP
- Katech Oil Pump
- Aviad dry sump baffle
- Comp Lifters
- Custom cam
- Cometic head gaskets
- Cloyes billet timing chain setup

Drivetrain:
- RPM Level 6
- RPM Level 3 Rear Diff
- DSS Carbon prop shaft
- RPS Twin Billet Carbon Clutch w/Flywheel
- 300M Axles
- MGW Short shifter with Box

http://b.a.d-cd.net/cb8aa98s-960.jpg
http://h.a.d-cd.net/b78aa98s-960.jpg
http://a.a.d-cd.net/604aa98s-960.jpg
http://a.a.d-cd.net/44aa98s-960.jpg
http://h.a.d-cd.net/814aa98s-960.jpg
http://b.a.d-cd.net/4c4aa98s-960.jpg
http://c.a.d-cd.net/7a4aa98s-960.jpg
http://d.a.d-cd.net/494aa98s-960.jpg
http://g.a.d-cd.net/f64aa98s-960.jpg

Suspension
- PFADT Motor Mounts
- PFADT Trans Mounts
- PFADT Pillow Blocks
- PFADT Heavy Rate Sway Bars
- PFADT Spherical Bearings
- PFADT Coilovers

http://c.a.d-cd.net/7408bd8s-960.jpg
http://f.a.d-cd.net/f408bd8s-960.jpg
http://c.a.d-cd.net/c08bd8s-960.jpg

MGW Short Throw Shifter :)
http://g.a.d-cd.net/5f0d598s-960.jpg
http://g.a.d-cd.net/c48d598s-960.jpg

What are you doing with the LS7? :suspect:

dunno, i am keeping it for a future project. i'll find a good use for that engine :)