The Otters tiny TD04 Build

As some of you know I have been working on getting all the parts I need and what not for this so called build of mine. I have been posting everything about my build on my own forum and though I might as well make the info public. So for those who did not know.. The cat is out of the bag.

So here is the small list of things I have.

Built Pampena 3.1 6g72 w/ rays custom ross pistons with upgraded pins - oliver billet rods - new OEM forged crank

Pampena 5 speed with 300m 25spline OS
Clutchmasters 850 series (8.5'') Stage7/8 - 2 Lightweight Unsprung Race Disks
Broomfield Racing Billet Transfercase
Port and Polished Heads - Pinned - +1mm exhaust valves and GZP +1 and -3 degree cam gears
GCTech Tubular td04 front & rear manifolds + rear o2 housing with Ceramic Coating
Dynamic Racing DR-750r turbos
STM tank to rail fuel kit
HKS Twin Power
Apexi S-ITC
ABS Delete
Austin@STM's Front hubs w/ ABS Sensor delete
Austin@STM's Driver side intake manifold.
Austin@STM's old stripped down VIS Carbon Fiber hood
Austin@STM's Half size koyo race radiator
Bought about $2400 in OEM parts to make this whole long block build fresh (Thanks Chris)
DR ARC-2 w/ 92mm MAS
BlackStealths LCD Boost Controller w/ MAC Valve
Greddy SMI Boost/Water Temp/Oil Pressure Gauge w/ controller
Deatschwerks Injectors 1000CC Injectors
Walbro 400lph E85 Pump
Treadstone TR1235 Intercooler w/ Custom Hard piping Thanks to Dave@Pampena
Megan Coil Overs
Corbeau Forza Sports
Maximal Adjustable Control Arms
STM Standard Oil Cooler
Maximal Solid Mounts
David's Replacement Trans Mount
Ninja Performance IAC Block
Pampena Billet Rear Diff Bushings
TiAL Q BOV
Pampena AWS Delete
Austin@STM's VIS CF Hatch
Solid Rear Diff Bushings
Krank Vents
Street/Strip Cage
AX6 Front & Bobcat Rears w/ Power Slot Rotors - Brakes
ACPT CFDS
Aftermarket Radiator w/ pipes
Very short exhaust
Weds TC105N's
Vibrant 6 port vacuum block (piece of shit out of the box)
Torque Solution Solid Shiter Base Bushings
STM Shifter Cable Bushings
Greddy Magnetic Oil Drain Plug (so fancy)
New OEM Oil Cap (just because)
NRG Purple Lug Nuts (because rice)
STM's Light Weight battery kit
Fiberglass and Carbon/Kevlar Doors
Carbon Fiber 99 Sail Panels
Chromed ECU (99 Flash Ecu)






Things I need:

Get the car down to sub 3000lbs


300m Rear Axles
Convert Power Steering Rack to Manual Steering Rack
Paint



So I guess below I will post pics of the stuff I have and post info on how the build is going and the current state it is in.

Here is the bottom end of the block

http://theotter.org/Images/Parts/blo...ttom%20end.jpg


Here is the DR-750's w/ the 16 psi forge wastegates (It's been too long but I am pretty sure its 16psi if not higher..)

http://theotter.org/Images/Parts/dr750's.jpg


Here are the manifolds before and after coating.

http://theotter.org/Images/manifolds/IMAG0331.jpg
http://theotter.org/Images/manifolds...d/IMAG0448.jpg

Here is the tranny at Ray's when he finished it

http://theotter.org/Images/Parts/tranny.jpg

Here is the T-Case when I got it back from him.

http://theotter.org/Images/Parts/tcase.jpg

Here is a picture of the clutch stolen from Austin@STM's facebook page.

http://sphotos-a.xx.fbcdn.net/hphoto..._3765411_n.jpg

Here are the Greddy Gauges in the dash.

http://i.imgur.com/vrOFJ.jpg

Here is my big box of OEM goodies from Chris.

http://sphotos-b.xx.fbcdn.net/hphoto...65783324_o.jpg

Here is the LCD Boost controller screen I put in my tach

http://i.imgur.com/uN1Kh.jpg

I thought I had more pics, but I guess not.

Anyways, I am basically ready to slap the motor all together. I just received a package yesterday from Hans, which contains some exhaust studs for my heads (I replaced the nasty old looking ones) So once I put those in I will start putting the long block together.

This should be a fun little project.

nice. what manifolds are those? did you coat them yourself or take it somewhere?

They are the GC Tech manifolds. I had Tirado Custom Coatings coat them, they are in Seguin, Texas. They do amazing work.

oh. i'm a tard and completely missed that on your first post. looking to be a good build! take lots of pictures!

Awesome, thanks for posting this.

Tons of pictures will be had.

And no problem CB, it was about time I do this :P

looks like a nice build.

How many months do it take for TCC to do your manifolds?