I forgot to address this post. I purposely held the brace off the bottom of the case for this reason. There is about 3/32" room in a 4" path that oil can travel.
Printable View
What temperature is that coating rated for?
I will post info when I find it again. It is 1800* coating though.
@ 1685* tested by Ford on a 6l powerstroke
3% more effective at preventing heat loss compared to heat shields.
186* less at 1.5" vs heat shields
https://lh6.googleusercontent.com/-9...5/cerikote.jpg
With the meth you shouldn't hit that temp, without you may. I do.
From the phone.
Hopefully the coatings won't wear off too easily :) I had bill take the turbine housing for my 6266 with him.
Small update, as the Mrs has kept me Honeydoing the past three days. Damn garden!
Got her welded up
https://lh4.googleusercontent.com/-A...1914712363.jpg
Fuel pump hanger is ready for assembly, and install. I had to weld the feed, and nut, O-ring, and epoxy the return. No room for welding between them.
https://lh6.googleusercontent.com/-j...1848695922.jpg
https://lh4.googleusercontent.com/-b...2108159464.jpg
https://lh3.googleusercontent.com/-I...2492900374.jpg
https://lh5.googleusercontent.com/-w...2679307546.jpg
Oh, and I am not sure what UPS has going on vs USPS, but shipped lcdbc back to Antero for an update, and UPS is charging a $60 brokerage fee!?! USPS does not. Apparently the high school student that took my package at the UPS store had trouble discerning the word value, and transaction. So now I will have $100 in round trip fare for a box that is 3"x4"x2".
FU!
people swear usps is bad and blah blah blah, but i use them 100% of the time. never had an issue, always tracks packages well, and ALWAYS the cheapest to deal with. i havent had a problem, maybe i am lucky?
Never had a bad experience with usps. Bought countless things from vendors or members and had them all shipped international freight with usps not a single loss not even any real delays. Fedex and ups are just far too expensive.
Sent from my GT-I9300 using Tapatalk 2