Printable View
Working on making my gauges in the A-pillar more OEM with connections at the gauge in the pod, not just at the base of the A-Pillar.
https://scontent-ort2-2.xx.fbcdn.net...de&oe=5A1112FD
https://scontent-ort2-2.xx.fbcdn.net...1f&oe=5A045E63
https://scontent-ort2-2.xx.fbcdn.net...9d&oe=59F646CD
This started from needing to pull the gauges out to have the needles changed from white at day to red at day.
Evo X test fitment. Got these Wheels a while ago was planning to run them this summer but car didnt pass inspection.
Anyways fits pretty well just as is. Ideally I will want a 10mm spacer on the rears. And i need a couple degrees camber on all corners.
When/if I do the fender flares I would need massive spacers for these :pig: but probably just sell them by then
Attachment 9441Attachment 9442
Perfecting my harness making skills:
http://i.imgur.com/sNMQsBN.jpg
http://i.imgur.com/eBUMdNu.jpg
Looks like your mouse is contemplating a meal, Steve...:pQuote:
Originally Posted by 2fnloud
Nice label on the cable. How did you make it?
Label maker that can print on heat shrink tubing:Quote:
Originally Posted by Unlogic
https://images-na.ssl-images-amazon....pL._SY355_.jpg
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Thanks!
I had no idea that Dymo had heat-shrink tubing in their product range.
look into the Molshine Heat-Shrink Tubes media cartridges, cheaper and have great ratings on Amazon like 8.00 per in all three sizesQuote:
Originally Posted by Unlogic
https://www.amazon.com/s/ref=nb_sb_n...t-Shrink+Tubes
Making a Y-Pipe:
https://scontent-ort2-2.xx.fbcdn.net...52&oe=5A470925
https://scontent-ort2-2.xx.fbcdn.net...f3&oe=5A497814
Need to order one more T-bolt clamp, cut the 3" tube to size, bread the ends. I also need a BOV, I want nice, I want loud, hate all you want, I want that Fast and Furious blow off valve sound.
Looks good, Steve. Though it might be a hair long ;-)
I borrowed a bead roller from a co-worker that works great. Didn't know how expensive it was until I just looked it up.
https://www.amazon.com/Vibrant-Perfo.../dp/B00LF4T82Q
Alternatively, I have also made a bead roller/crimper out of some channel lock pliers, exhaust clamp, and crankshaft woodruff key. It worked well too, just not as pretty and a lot more work. Also, mine only works on 2" pipe. Although I'm sure you could cut the sides of the exhaust clamp to accommodate different pipe sizes.
https://www.google.com/url?sa=i&rct=...05513375767560
As far as BOV, I couldn't agree with you more, louder is better. I run the Turbo XS RFL. You can get practically identical knockoffs on ebay for a fraction of the cost. We just picked up a nice blue one for Char's Vr4.