Printable View
Ok good to know the reasoning behind not including a male end connector. I have the mitsu reflash connector sitting in my lap right now and it's got one male end that plugs into the tactrix but the other end is actually an ODBI port.
So modern evo's have both an ODBI and II port, but the ODBI is only used for flashing the ecu, and only when the tactrix is plugged into the ODBII port.
I'll run out and get a cable so I can get to flashing!
For anyone wondering. This is the cable you need for the reflash connector.
For only $1.69 each when QTY 50+ purchased - 3ft 2.5mm Stereo Plug/Plug M/M Cable - Black | 2.5mm Audio Cables
I just went to radio shack and they soldered a cable together for me for only $4. That an option if you don't want to wait for a cable shipping to you.
Alright I got it flashed and it fired right up! Ran around 15.5 afr but I only let it run for about 2 minutes so that might settle lower if i leave it to run a bit more. I'm pretty happy that I've finally got an easy and complete tuning system. You rock Greg.
Three posts in a row!
I took it out for a drive and am running really lean, wideband was showing ~15.5 when cruising, and it would die every time I came to a stop. The o2 feedback trims are showing a max of 12.65 for most of the journey so that would mean it's trying to add fuel. All I messed with on the stock tune was the injector size to 550 and the latencies, along with disabling some CEL's.
I would upload the log but I can't attach it because there's no compatibility button on the uploader.
Whats your low vs mid trim?Quote:
Originally Posted by Goallie11
If both are +12 then drop your injector scaling size 10%.
If idle is a lot higher than the cruise trim then add 10% to your injector latency and go logging again.
Sent from my DROIDX using Tapatalk 2
Nothing wrong with that cruise AFR(as long as we're talking flat ground, and true cruising). But, yeah, it obviously shouldn't die when coming to a stop. Need to see a log.
Jeremy
All my trims, FuelTrim_Low to high only show 0.1 on the evoscan log the whole way through, I would guess they're not supposed to. The only one I have that changes is 02FeedbackTrim, which is the one show 12%Quote:
Originally Posted by Forest Gump
Yeah the cruise I'm not worried about, how can I upload a log, or save it so that it can be uploaded? I'm using windows 7 and the only way to see that there are log files other than the two samples evoscan comes with is to hit the compatibility files button when in a folder. Those files can't be seen by an uploaded because it lacks that compatibility button.Quote:
Originally Posted by HilbillyHomeboy
The injector scaling is so far off the ecu will not update the trims. I've seen it do thisQuote:
Originally Posted by Goallie11
Drop your injector scaling 10%. If you have 550 in there change it to 500. Copy the logs to your desktop, then upload tjem.
Sent from my DROIDX using Tapatalk 2
I'll drop them and see what happens.
For the logs I've already tried that with the same result, not showing up. I'll try a different way but I'm at work now so it'll be a late update tonight.