Printable View
Made a plug and play wiring harness for the Diamante climate control and installed it. For now the climate control is just sitting in the opening while I decide what the best route is for mounting. Also need to order some new bulbs and some amber or red acrylic to change the display from the original blue color. I may look at creating a plug and play setup (with wiring and mounts) if there is enough interest.
Hung the axle back part of my OEM exhaust, awaiting for my tips to come back from being polished. Getting the cable connected to the cam was tricky, but with stubbornness, I prevailed!!!
Fixing up the clone/chrome adapter harness. It was wired for a 94/95 so I have to require for a 91 and I also wanted to add some length and clean up the cluster of wires.
Only about halfway done, but my back and eyes need a rest.
I'll also be adding the small plug for things like map/wideband and ecu controlled fans. So is till need to get the plug and pins to wire it up.
Before
http://uploads.tapatalk-cdn.com/2016...62e6f734d4.jpg
Midway(3 hours in)
http://uploads.tapatalk-cdn.com/2016...6a4cecc1b8.jpg
http://uploads.tapatalk-cdn.com/2016...a8bc6bacdd.jpg
Sent from my iPhone 6s+ using Tapatalk
That's a lot of soldering. Our car club hosted a car show yesterday. Hot day in the sun. You can see I have my stock seats back in now. I had a friend cut me some silver vinyl Mitsu logos for my headrests. Also ordered one of those amber gentex compass/auto dimming mirrors to try out. $64 off ebay with pigtail. My mirror constantly vibrates when driving. I can tell when a car is behind me but I can never make out what it is unless I reach up and steady the mirror.
http://i1192.photobucket.com/albums/...ps5cy2z43x.jpg
CIPA 36500 mirror is plug and play but also adds temp and compass and maplights. I used to have that vibration issue until I replaced the mirror.
Link to Amber mirror please.Quote:
Originally Posted by fastfalcon94
This is the one I bought:
http://www.ebay.com/itm/131820160334
It's a gentex 453 mirror. You want to make sure the number on the back has the ZTVHL3 so that the wiring is easier. Here's a video I watched on youtube before buying. Has homelink, auto dim, and compass. I did find one that had temperature too in amber but it also had map lights. That would be awesome for a spyder but I didn't want 2 sets of lights. IDK if they make one with autodim/compass/temp/homelink all in amber.
https://www.youtube.com/watch?v=jjwjeVfdZ8k
I would love to find the Amber with temp and compass.Quote:
Originally Posted by fastfalcon94
Took apart the rear driver side wheel bearing with the intent to FINALLY find the culprit of my squeak I have had for a few thousand miles.
It ended up being the inner bearing dust shield. It was not seated all the way down and making some contact with the companion flange. Drove it around the block, squeak free!! Put a new inner bearing on anyways.
I had an amber one with the temp/compass/homelink/autodim. I got it at the junk yard and I do not remember what vehicle it came out of. I used it in my last F150 as I wanted the temp and autodim. So they do exist just not sure what it came out of. thinking it was Chevy/GMC/Cadillac as that is where I usually get them from. I know most of the newer ones have the OnStar thingy built in them also.