i put my stickers on my 91 TT rear windshield from blue ridge gathering. couple from the souvenir shop at deals gap and the brg logo. also put some ninja performance decals on there also
Printable View
i put my stickers on my 91 TT rear windshield from blue ridge gathering. couple from the souvenir shop at deals gap and the brg logo. also put some ninja performance decals on there also
amen to that. Every day occurrence for me as well.Quote:
Originally Posted by Granny
Pulled the transfer case to fix a leak. input seal had a kink so had to put a new one in. Took the casing all apart and ran it through the blast cabinet to clean it all up while waiting on the seal to come in. painted the center section and clear a the rest to help keep it clean. Got the seal in today from Ninja, all back together and should be able to reinstall it tomorrow.
Then I'll be pulling it out of the garage and pulling the trailer in. Going to try and knock out some work on it before it rusts to death sitting outside...LOL
Any pics Greg? I have a similar leak on my TC.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Here is the leak in the input seal if that is what you were talking about:
http://fbcdn-photos-g-a.akamaihd.net...e89575ba43c3aa
I kept thinking it was from the rear turbo drain or something above it. Finally pulled the x-case and found that little crease in the seal.
No pics of it all back together. Nothing special really. Clear coat just helps keep dirt and crap seeping into the aluminum's pores and staining it.
yeah takes a couple hours to fully clean and re-seal the t-case, but worth it.
Yeah I thought mine was the transmission but the fluid wasn't red like the MT85. That seal damage is pretty subtle in the pic.
Sent from my SAMSUNG-SM-G900A using Tapatalk
i drove my 93 3kgt to my moms for some family time. correction, i drove my 93 3kgt (without any problems).... :-D
hasnt stalled since i swapped the ECU out. sometimes it still takes a few extra seconds for the idle to even out when in neutral. still drives great otherwise.
Skinned my FG hood in Carbonfiber. I think for being the first time I work with CF it turned out pretty good. Hardest part was folding the CF around the edges. And it was messy, epoxy everywhere...
Next step to put on clearcoat. Will leave that to a professional though.
Attachment 8344
btw. does it need to be some kind of special clearcoat? I know epoxy is sensitive to UV.
I think there is a special clearcoat with UV protection in it that you can buy.