On the way out to Ninja, headed to a Carolina Panthers game this weekend so I'll give him a hand for tomorrow.
Looking at finalizing my radiator plans, need to do the 2G bucket swap first so I can make a cardboard mock up to work with.
Printable View
On the way out to Ninja, headed to a Carolina Panthers game this weekend so I'll give him a hand for tomorrow.
Looking at finalizing my radiator plans, need to do the 2G bucket swap first so I can make a cardboard mock up to work with.
Chris and I tore down my trans today.. Bad 1&2 gears, bad 1&2 slider, 3rd gear has some wear (but is usable), 3&4 slider should be replaced, 5th gear has more wear than normal (but can be reused since you know..its 5th) and reverse of course looks like dog shit. End case needs replaced as well. Looks like its going to be around 3k for the rebuild offhand, gotta look it all up.
started pulling my trans for a clutch, cried a little, then cracked a beer
I'm working on putting mine back together after doing the clutch. Hopefully it will be running tomorrow night.
Started looking at the gthoe. Not looking good.
You can just see the edge of the belt in this shot which made me think there might be hope and the belt somehow stayed on. Nope.
http://i299.photobucket.com/albums/m...pszitash8h.jpg
Timing marks way out on cams.
http://i299.photobucket.com/albums/m...pstllgv4gx.jpg
http://i299.photobucket.com/albums/m...psmkixunkr.jpg
Pulled front rocker cover....... Front cam looks fine. All the inlet cams are bent and the rockers have fallen off. Most of the cam lobes are scored so cam is now junk.
http://i299.photobucket.com/albums/m...psi2kov2ln.jpg
http://i299.photobucket.com/albums/m...psjqqa21v6.jpg
http://i299.photobucket.com/albums/m...ps2veem7sd.jpg
http://i299.photobucket.com/albums/m...ps5fzjycbw.jpg
http://i299.photobucket.com/albums/m...psvscnyyfe.jpg
http://i299.photobucket.com/albums/m...ps1dovdvsp.jpg
So new heads at a bare minimum.
:shitsweak:
:( Damn, I'm sorry.
-John
that sucks
That's sucks but cams should be fine. The roller is wide, so a scratch isn't going to affect the performance.
Agreed with familyMAN. So long as they are scratches and not deep wide gouges, should be fine.
Quote:
Originally Posted by familyMAN
Good to know. A mate has a spare set of heads he is giving me so I probably won't need them anyway. Just so frustrating when these heads where reconditioned only 50k kms. I'll just take the lash adjusters out of these heads since they are the 3rd gen type.Quote:
Originally Posted by sergechronos