Bah, If it's the last thing I ever do on the GTO, it will be to figure out how to seal some door pods AND allow the class to lower properly.
Printable View
Bah, If it's the last thing I ever do on the GTO, it will be to figure out how to seal some door pods AND allow the class to lower properly.
The doors were done in and out with vblock and there's dampening pads for the speakers. There is also a cascade rattle foam under the wires and door rods.
The silver speaker is 6.5" the 7" speaker is the black
Yes that is a black door door panel.
I obviously didn't make myself clear enough so let me specifyQuote:
Originally Posted by mb7050
http://www.johnforceracestation.com/...97494529_1.jpg
Wow nice tear in the cone....Quote:
Originally Posted by mb7050
Low Profile Subwoofers
Make a great woofer in a door I recon :) just run it up to 800 and do a mid from there etc
what would you suggest in the 7" range . I would think uneven core would cause uneven mass on the cone and thats a bad thing right ?Quote:
Originally Posted by reallyxxxxxxloud
There is nothing wrong with that brand / model of speaker. He is pointing out that it appears that the photo you posted has a tear in the cone, like it was cut or ripped by slamming into something.
If you can make that fit in the places that we talked about in CHAT BOX, THAT would be a very advanced system, no need for passive x-overs, let the MS-8 do that. Hope you can get all that stuff to fit.