Opinions on these methods to lower knock and IDC's...

Quote:

---

Originally Posted by DG

OK, let me restate:

YOU MUST HAVE A WIDEBAND O2 SENSOR IF YOUR ARE ADJUSTING FUELING THROUGH ANY MECHANISM, BE IT CHANGING INJECTOR PULSEWIDTH ELECTRONICALLY, OR MECHANICALLY VIA FUEL PRESSURE

We keep repeating this because you don't seem to get it.

We are trying to help you out. There are cumulative DECADES of tuning experience here in this thread.

DG

---

DG, please don't take my responses in a derogatory way, I completely understand what your saying. Many of those who have posted on this thread I'd consider "experts" in the platform and hold their opinion highly, I've been around long enough to know who they are, you are among them...

What I'm saying is, this is the situation I'm in, right now a WBO2 is not an option for me. I understand I need one when dealing with fuel changes, but instead of reminding me of that, give me more constructive feedback based on my situation... Would you recommend I bring FP back to 43psi or what would be a safe baseline?

From the recommendations of other respected 3S tuners, I was told bumping up the pressure won't hurt. Since I did so, the car runs considerably better at WOT, have zero knock issues, and timing is still in check. From my personal experience, I have seen no ill effects of the changes made.

Quote:

---

Would you recommend I bring FP back to 43psi or what would be a safe baseline?

---

Honestly? I'd reset everything back to stock until you were capable of affording the right tools.

Maybe I'm pounding on you a bit hard, but there are like SIX threads going on where guys are trying to tune without using the right tools right now. That was understandable 15 years ago when we were all learning... but these days when tuning information is all over the Internet?

This is a lesson worth learning early, so you're on the receiving end of some tough love with the hope that the next 20 guys will read it as well: doing it right up front ALWAYS trumps doing it half-assed and trying to work around the incidental problems. When we are talking engine upgrades, that means purchase #1 is a wideband O2 sensor. It is the prereq for doing boost increases, fuel pressure increases, and injector changes, and it's not a bad idea for exhausts and intercoolers too. If you can't afford one right now, then you cannot afford engine modifications yet.

DG

turn the boost back to stock, you can leave the fuel pressure, its not going to hurt anything being up, keep an eye on knock. THis is the wideband I have, It's VERY affordable, and has everything you need to keep CEL's away, and provide data to a logger.