You just reminded me that I need to modify my fuel pump housing and throw an AN fitting on it.
I am liking your progress.
Printable View
You just reminded me that I need to modify my fuel pump housing and throw an AN fitting on it.
I am liking your progress.
What...you dont like the rubber-twisty-hose-of-death?!?Quote:
Originally Posted by FeaRpb
Lol, my first fuel pump swap I broke that hose in half without knowing.
But no, I have a fuel kit that runs to the tank. I was going to get the jackhammer hanger but never got around to it and now it's no more..
*Back to your scheduled Coop Build*
Agreed...Quote:
Originally Posted by FeaRpb
...whats up with that?Quote:
Originally Posted by CoopKill
Says he is falling behind on the large order in front of me. I give him no grief as I want my shit done well. Same company that did my intake, and covers.
Coater failed me again. At least this time they are coated, and were in the oven. Tomorrow I will have! Woot!
So... Yeah, about the welding needing done. I know 4 people that weld aluminum. My First go to was a no go due to burning his shop to the ground! :sad: The next 2 are going to the dunes to play. :dontknow2: The 4th, yes the 4th is a machine shop specializing in heads. Well this guy can suck it! Says $150 for 5 one inch welds... On my way home I remembered there is a aluminum boat fab shop not far. One man show, cool as hell, and is getting my shit done tomorrow! woot... I had to remove the bearing, and the plastic oil diverter. $65 for the brace, and the 2 an fitting on the fuel hanger.
Quick question, does the race where the plastic oil thing sear all the way flush? There are 2 spacers/washer pieces I assume go on each side of the plastic? I will look at the manual, but if someone can confirm...
I got the holes cut for the an fittings ready for welding.
https://lh4.googleusercontent.com/-O...2718426858.jpg
https://lh6.googleusercontent.com/-g.../342676231.jpg
https://lh3.googleusercontent.com/-p.../661870151.jpg
Spent the rest of the shop time re-cleaning the bell housing for tomorrow.
i cant tell due to it being out of the tank, but make sure you strategically aim those an fittings so that you dont end up screwing yourself out of an easy connection
Yesir, done. :p
Hurry it up already.
Hope he is going to sand off that zinc before he starts welding.