Is it fuel or coolant in oil?
Printable View
Is it fuel or coolant in oil?
Unsure, I can't smell, but I believe coolant.
All oil left in the DP looked like mixed. All oil elsewhere had no contaminants in it. I need to remove the IC, and drain it to see if oil is contaminated there.
well at least the feeds weren't plugged :)
OMG I can't believe this happened. Hope the new turbos are not damaged :(
Turbs will be fine. Worst case might need to put seals in it. Awaiting instructions from Dan.
Also, wife says smells like fuel, but it is a green tint so unsure. With all the priming, and fuel dump that was done It more than likely has all both in it.
Looks like the hole is clogged....
Post via Tapatalk
Oh shit. Was that th feed or drain line. Looks like he drain. And I would put money on that being coolant. As you know the turbos are water cooled and if the seal wasn't sealing the oil and coolest would mix.
Yeah there is no way to do that with a feed line. It is threaded, not bolted/gasket.